Twin Cities Maker upcoming events

Wood Shop Maintenance Night (Mon, July 06, 2026)

Mon, 06 Jul 2026 23:00:00 GMT

WOOD SHOP MAINTENANCE NIGHT

Join Us for Our Bi-Monthly Wood Shop Maintenance Nights

This time is set aside to perform tasks around making sure our tools stay in peak performance and trying to ensure that the tools stay in good working order during the month. Never repaired a tool or performed maintenance before – not a problem!! There are maintenance task for all levels of expertise – and we’ll always have at least one person around that can help you learn!

Ceramics | Wheel-Throwing 101 (Mon, July 06, 2026)

Mon, 06 Jul 2026 23:00:00 GMT

Questions or trouble signing up for this class? Email ceramics@tcmaker.org.

This class is centered around the potter's wheel. Students will understand the basic tools and materials as well as proper studio safety and clean-up practices. Students will learn to prepare clay for throwing, center the clay on the wheel, open and pull clay walls, and create basic forms like cylinders and bowls. Finally, students will learn how to refine and trim forms, apply surface decoration and glaze, and understand the process of bisque and glaze firing.

The skills acquired in this class will the the foundation on which you can keep building with more advanced classes and/or open studio time.

Come ready to get messy. Wear clothes you don't mind getting dirty; don't worry about clay on your clothes - it washes right off! Most importantly, come ready to have fun!

This class is taught by Paola Evangelista. Artist and educator, born in Peru and based in the Twin Cities since 2019. Read more at www.paolaevangelista.com

Jewelry Orientation (Mon, July 06, 2026)

Tue, 07 Jul 2026 00:00:00 GMT

Come learn about the jewelry bench! We have tools to support fabrication workflows as well as casting (red sand and investment casting). The instructor's subject area is silversmithing, but all interest areas are welcomed as we seek to expand our jewelry-making offerings.

In this orientation, you will learn each tool's role in the jewelry-making process, from cutting and forming to soldering and polishing. This department is distinct from the Lapidary department, but the skills go hand-in-hand!

General Know-How

Safety guidance, risks and risk mitigation
Shop rules and expectations
The mounted tools (bench pin, flex shaft, drill press, bench buffer, scroll saw)
The furnaces & kilns

Fabrication

Measuring and Marking

Calipers, rulers, dividers, scribe, center punch, stencils

Forming

Rolling mill, steel/rubber blocks, hammers & mallets, mandrels, swage blocks, wire wrapping

Cutting and Reducing

Files, sandpaper, jeweler's saw (and how to replace its blades), shears, hand cutters, rotary tool bits

Joining

Solder and when to use each type, solder picks, torch, flux, fume extraction, pickle

Polishing

Rotary tool options for detail polishing
Bench buffer for mass polishing

Various Jigs and Miscellaneous

Miter jig, wax ring blank cutting
Scrap metal rules

Casting

Wax carving and mold creation
Red sand / delft clay casting
Investment casting — This will be a general overview of the tools. The process is VERY involved; keep an eye on WA for a full class in the future!

Conclusion

We will end by discussing what's next for the jewelry department, how to get involved, and where to find resources for learning more.

Happy making!
~Abby

Open Circuits (Tue, July 07, 2026)

Wed, 08 Jul 2026 00:00:00 GMT

Your Weekly Electronics Hang at Twin Cities Maker

Join fellow electronics enthusiasts, hosted by David Zuhn, every Tuesday at Twin City Maker for Open Circuits! Whether you're a pro or just starting out, this is the place to tinker, learn, and collaborate.

What to expect

You can bring your own project for show-and-tell, to get help, or to just plan on making progress
Contribute to community projects (see list below)
Learn how to use the E-lab equipment
Connect with fellow Twin Cities Makers

Open Circuits is open to both Twin City Maker members and the public at large. We'll meet in the Twin Cities Maker Electronics Lab and spill out into the lobby as necessary.

Community Projects

(on the docket for the foreseeable future)

Raspberry-Pi-based parking permit printer for member storage
Fob-based vending machine for tools and supplies
Fob-based access control to heavy machinery
Vacuum sensors
Energy monitoring (single-phase and 3-phase)
Temperature controller for glasswork

Side Projects

Humidity sensors (e.g., for 3D filament dry boxes)
Strain gauges for weighing propane tanks
ESP32 and ESP8266 projects using Wi-Fi and MQTT

Learn new skills

Wire crimping
Oscilloscope usage
Microcontroller programming
Reverse engineering
3D modeling enclosures

It is not necessary to RSVP to this event!

Troubleshoot Tuesday (Tue, July 07, 2026)

Wed, 08 Jul 2026 00:00:00 GMT

Electronics in need of repair? Stop by Twin Cities Maker on Troubleshoot Tuesdays to get help from a pro and learn to fix your device! This will be an opportunity to diagnose your electronics issues and get some basic repairs.

Please sign up using this form to attend, this will help our techs prepare for your arrival!

Troubleshoot Tuesdays are run by RECA, Minnesota Tech for Success, and Free Geek Twin Cities.

Twin Cities Maker Open House (Wed, July 08, 2026)

Thu, 09 Jul 2026 00:00:00 GMT

Twin Cities Maker (TC Maker) is a non-profit, all volunteer run, community maker space based in the Minneapolis/St. Paul area.

Our mission is to make, share, and learn.

We have a maker space (The Hack Factory) for members to build projects using various media and technologies, from wood and metal working, electronics to fabrics, laser cutters to 3D Printers and beyond.

We invite you to come visit our space and take a tour to learn about our community, and how you can participate in it. We welcome folks to check out the space on Wednesday evenings. A tour of the space will start in the lobby at 7 PM.

Learn more about us at our website! https://www.tcmaker.org/

This event is a tour only. Non-members are not permitted to operate any tools or equipment. Appropriate safety precautions MUST be taken before entering the shop.

Fiber Fun Night (Wed, July 08, 2026)

Thu, 09 Jul 2026 00:00:00 GMT

Fiber Night on Wednesday in the lobby for anyone who wants to join! We'll be working on beginning knitting and crochet but are open to any other suggestions

Email artifactory@tcmaker.org with questions!

New Member Orientation (Thu, July 09, 2026)

Thu, 09 Jul 2026 23:00:00 GMT

About this event

Whether you are a brand new member of Twin Cities Maker, or have been a member for a really long time but haven't been in the shop for awhile, attending a new member orientation will get you up to speed on the policies, guidelines, and culture of Twin Cities Maker.

Signup, download a copy of our handbook, and come to session. During orientation you get to meet some new people, have all your questions answered, and get acquainted with Twin Cities Maker policies, guidelines, and culture.

Orientation lasts for about 1 hour with time after for questions and support for any issues.

After you have completed orientation you will receive your fob to access the facility, which will be activated once have paid all membership fees.

If you are going to be working in the woodshop be sure to sign up for woodshop orientation immediately following this class. Check our orientations calendar to register.

All New Members are required to Pre-Register for this Orientation.

If you cannot attend an in person orientation, please reach out to membership@tcmaker.org so that we can work out special arrangements.

Wood Shop Orientation (Thu, July 09, 2026)

Fri, 10 Jul 2026 00:00:00 GMT

Wood Shop Orientation

Wood Shop Orientation is a required orientation for all woodworkers.

During Orientation we will cover basic shop safety guidelines along with best practices that are necessary to use the wood shop at Twin Cities Maker!

https://wiki.tcmaker.org/en/shop_departments/wood_shop

Paint Club (Thu, July 09, 2026)

Fri, 10 Jul 2026 00:30:00 GMT

At Paint Club we hang out and paint. Bring your supplies and a project.

On the first Thursday of the month we're in the classroom, otherwise we're in the Artifactory. You can just show up.

CNC Orientation (Fri, July 10, 2026)

Fri, 10 Jul 2026 23:30:00 GMT

Join this in-person orientation to learn more about the CNC routers at Twin Cities Maker.

Orientation will start in the classroom—not the CNC room.

Agenda:

Overview of the CNC routers
Rules and Restrictions
How to get Signed-off
Demonstration of toolpath generation using VCarve
Demo cut on Shapeoko or the 4' × 8' Sequoyatec

CNC orientation is generally held on the second Friday of the month.

Woodworking 101 (Fri, July 10, 2026)

Fri, 10 Jul 2026 23:30:00 GMT

This class will provide wood shop users with foundational skills in woodworking including planning, materials, marking, skills, and tool use.

Students will be introduced to the TC Maker wood shop mindset and safety expectations. Learn how to plan a successful project with a focus on construction methods and joinery. Select wood, measure and mill materials, and learn order of operations and assembly. Finally, we'll cover wood finishing including finish options and technique.

Each of the four sessions will last two hours and start with a lesson portion. If we have any extra time, the instructors can help answer questions and consult on projects.

Tools Covered

The workbench, clamps, vices, measuring tools, squares, chisel, hand plane, bandsaw, table saw, jointer, planer, sanding station, and more.

What to Bring

Clothing suitable to the wood shop. Wear close-toed shoes and avoid loose, dangling clothing and accessories.

Eye and hearing protection is required. Dust masks and eye/ear protection are available to borrow but bringing your own is recommended.

Rescheduled Metal Shop Maintenance Morning (Sat, July 11, 2026)

Sat, 11 Jul 2026 15:00:00 GMT

Join us as we listen to Jazz 88's Bluegrass Saturday Morning and work to make the metal shop a little brighter and more functional! First Saturday of every month we'll chip away to make our space better and cleaner!

Registration is not required although it helps us gauge what we can get done. Drop-in and stay a while, or come and pass a broom once, everyone is welcome.

Metal Shop Orientation (Mon, July 13, 2026)

Mon, 13 Jul 2026 23:00:00 GMT

This is orientation required for use of the metal shop at TC Maker Minneapolis. We explain our equipment, safety procedures, storage and training requirements for our more advanced tools. Also provide recommendations for PPE, consumables and other things to help make your use of the metal shop effective for you and our other members.

At 6:45 we will do a brief training for use of the metal shear, which requires in-person checkoff. Following that, you will be allowed to use our 4' sheet metal shear. You can attend either or both sessions if you wish.

Please be on time and let me know if you cannot attend. Thank you

Ceramics | Wheel-Throwing 101 (Mon, July 13, 2026)

Mon, 13 Jul 2026 23:00:00 GMT

Questions or trouble signing up for this class? Email ceramics@tcmaker.org.

The skills acquired in this class will the the foundation on which you can keep building with more advanced classes and/or open studio time.

Come ready to get messy. Wear clothes you don't mind getting dirty; don't worry about clay on your clothes - it washes right off! Most importantly, come ready to have fun!

This class is taught by Paola Evangelista. Artist and educator, born in Peru and based in the Twin Cities since 2019. Read more at www.paolaevangelista.com

Twin Cities Maker Quarterly Town Hall (Tue, July 14, 2026)

Tue, 14 Jul 2026 23:00:00 GMT

We encourage all members to attend our Town Hall meetings!

The Town Hall is on the 2nd Tuesday of the 3rd month of each quarter. This is an opportunity for every member of Twin Cities Maker to meet with members of the senior leadership. Each meeting will comprise of an update on major ongoing projects, overall strategy, and what the future holds. The remainder of the meeting will be dedicated to general discussion and Q&A.

All Town Hall meeting are held in person in the Artifactory as well as virtually online. To join the meeting online please visit https://go.tcmaker.org/boardmeeting

Open Circuits (Tue, July 14, 2026)

Wed, 15 Jul 2026 00:00:00 GMT

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

You can bring your own project for show-and-tell, to get help, or to just plan on making progress
Contribute to community projects (see list below)
Learn how to use the E-lab equipment
Connect with fellow Twin Cities Makers

Open Circuits is open to both Twin City Maker members and the public at large. We'll meet in the Twin Cities Maker Electronics Lab and spill out into the lobby as necessary.

Community Projects

(on the docket for the foreseeable future)

Raspberry-Pi-based parking permit printer for member storage
Fob-based vending machine for tools and supplies
Fob-based access control to heavy machinery
Vacuum sensors
Energy monitoring (single-phase and 3-phase)
Temperature controller for glasswork

Side Projects

Humidity sensors (e.g., for 3D filament dry boxes)
Strain gauges for weighing propane tanks
ESP32 and ESP8266 projects using Wi-Fi and MQTT

Learn new skills

Wire crimping
Oscilloscope usage
Microcontroller programming
Reverse engineering
3D modeling enclosures

It is not necessary to RSVP to this event!

Wiki & Wine: Upgrade TCM's Wiki (Tue, July 14, 2026)

Wed, 15 Jul 2026 00:00:00 GMT

What tools do we have? Where are they? What do they look like?

Our wiki (wiki.tcmaker.org) needs an overhaul, and we need a group of volunteers to pull it off. Expect a glass of wine, collaboration with fellow makers, and a better-organized collective knowledge base.

No experience needed! Bring a laptop since we'll likely only have one PC set up, but keep in mind this first meeting will be heavily focused on planning, styling, and structure.

We'll be starting fresh with a MediaWiki (like Wikipedia) installation, pulling from the current Wiki.js setup for source material—at least for the parts that aren't wildly out-of-date.

3D Printing - Intro Class and Orientation (Wed, July 15, 2026)

Wed, 15 Jul 2026 22:00:00 GMT

Curious about 3D printing? Want to make organizers, replacement parts, cosplay props, custom brackets, mounts, prototypes, or just something fun you found online? This is your starting point.

No previous 3D printing experience needed. Just bring your curiosity.

In this hands-on session, we will walk through how the 3D lab works, go over shared space guidelines, and guide you step-by-step through printing on our Bambu Lab 3D printers. Bring an STL file if you have one you are excited about, or use one of ours. If your print does not finish during class, you can pick it up later. Filament for training prints is provided.

By the end, you will be officially checked off and ready to use the Bambu Lab printers on your own.

If you have printed before, you are still welcome to join. You can also email us about scheduling a quick 30-minute check-off session.

Want to go further? After this class, members can request intermediate training to unlock our Bambu X1C with AMS. A resin class for the Anycubic resin 3D printers is also available upon request. 3D scanner training for the Creality Raptor Pro is available upon request.

Got any questions or need assistance? Email us at 3D@tcmaker.org and we are happy to help.

We cannot wait to see what you make. Happy making!

Ceramics | Wheel-Throwing: Beyond the Basics (Wed, July 15, 2026)

Wed, 15 Jul 2026 23:00:00 GMT

Questions or trouble signing up for this class? Email ceramics@tcmaker.org.

9 sessions across 3 summer months

Intermediate level

Prerequisite: Wheel Throwing 101 or equivalent experience

Summer is the perfect time to slow down, go deeper, and let your practice breathe. This three-part series is designed for makers who have the basics under their belt and are ready to push their forms further (without the pressure of a back-to-back weekly commitment).

Spread across three focused 3-week sessions with intentional breaks in between, this class gives you time to make, reflect, experiment on your own, and come back ready for the next challenge. Each module session builds on the last, so by the end of the summer you'll have a cohesive body of work and a noticeably expanded throwing vocabulary.

Session 1: Going Bigger We start by stretching your ambitions and your clay. Our focus will be on throwing larger, more complex forms: taller vessels, wider openings, closed vessels, and pieces that require more control, patience, and planning. Expect hands-on demos, individual feedback, and a honest look at where your technique wants to grow.

Session 2: Lidded Forms One of the most satisfying and technically demanding areas of wheel throwing, lidded forms ask you to think about fit, proportion, and function all at once. We'll explore different lid styles and how the relationship between vessel and lid defines the whole piece.

Session 3: Dinnerware & Beyond The final module takes on the dinner table — plates, bowls, and the forms that make a set feel intentional. We'll also explore what happens when the wheel is just the beginning: altering thrown forms off the wheel and integrating hand-building techniques to push your work into new territory. We'll close the summer with time dedicated to surface decoration and glazing, so your pieces feel as considered on the outside as they are on the inside.

The breaks between modules are part of the class. Use that time to keep making on your own, let pieces dry and get fired, and arrive at the next module with fresh eyes.

This class is for you if you've completed Wheel Throwing 101 or have equivalent studio experience and are ready to work with more intention and less hand-holding in the best possible way.

Instructor: Paola Evangelista is a ceramic artist and educator with 15 years of experience working across functional ware, sculptural installation, and everything in between. Her classes are a space to build real skill while asking bigger questions about what we make and why.

Recycled Art Night (Wed, July 15, 2026)

Wed, 15 Jul 2026 23:00:00 GMT

Join us for a fun, free evening of creative reuse at Twin Cities Maker! Bring recyclable or unused materials, such as magazines, newspapers, cardboard, fabric scraps, packaging, or other art supplies and transform them into original artwork through collage and sculpture making experimentation.

Come with a friend or on your own and explore how everyday materials can become something new. As part of the event, we'll also be hosting an Art Supply Drive that we will be donating to Art Scraps and other local arts organizations!

If you have extra art materials you're no longer using, consider donating them to help support the community. We'll provide shared tools, adhesives, and additional materials, and no prior art experience is needed. Whether you create an individual piece or collaborate with others, this is a great opportunity to experiment, make art, and connect with the community. This event is free of charge, but please rsvp in advance!

Twin Cities Maker Open House (Wed, July 15, 2026)

Thu, 16 Jul 2026 00:00:00 GMT

Twin Cities Maker (TC Maker) is a non-profit, all volunteer run, community maker space based in the Minneapolis/St. Paul area.

Our mission is to make, share, and learn.

Learn more about us at our website! https://www.tcmaker.org/

This event is a tour only. Non-members are not permitted to operate any tools or equipment. Appropriate safety precautions MUST be taken before entering the shop.

Fiber Fun Night (Wed, July 15, 2026)

Thu, 16 Jul 2026 00:00:00 GMT

Fiber Night on Wednesday in the lobby for anyone who wants to join! We'll be working on beginning knitting and crochet but are open to any other suggestions

Email artifactory@tcmaker.org with questions!

3D Plastics Repair Clinic (Thu, July 16, 2026)

Thu, 16 Jul 2026 23:00:00 GMT

Broken appliance or children's toy? Lost the battery cover on your remote? Don't throw it out - instead, bring it to a plastics repair clinic at Twin Cities Maker!

Once a month, join us for an evening of repair in our 3D Printing Lab. Our volunteers will help diagnose and guide your repair.

Here are examples of what our volunteers are able to help you with:

Keyboard tabs
Backpack buckles
Office chair wheels
Key fobs
Remote control covers
Plastic tote fasteners

Wiki & Wine: Upgrade TCM's Wiki (Thu, July 16, 2026)

Fri, 17 Jul 2026 00:00:00 GMT

What tools do we have? Where are they? What do they look like?

No experience needed! Bring a laptop since we'll likely only have one PC set up, but keep in mind this first meeting will be heavily focused on planning, styling, and structure.

We'll be starting fresh with a MediaWiki (like Wikipedia) installation, pulling from the current Wiki.js setup for source material—at least for the parts that aren't wildly out-of-date.

Paint Club (Thu, July 16, 2026)

Fri, 17 Jul 2026 00:30:00 GMT

At Paint Club we hang out and paint. Bring your supplies and a project.

On the first Thursday of the month we're in the classroom, otherwise we're in the Artifactory. You can just show up.

Jewelry: Open Studio (Fri, July 17, 2026)

Fri, 17 Jul 2026 22:00:00 GMT

~ This is a drop-in, drop-out event. Come as you please. TCM members do not need to RSVP, just show up! ~

Bring your raw metals and get guidance from experts!

Join silversmithing instructor Abby Schneider for Open Studio in the jewelry department! Drop in and out, or come for the whole time, it doesn't matter! We're here to hang out, listen to music, and build a community of people making beautiful things.

No prior jewelry experience is necessary or assumed, and this event can also serve as your orientation for the jewelry department. This is a time for getting together with other artists for community, advice/direct assistance on projects, and learning about safely using the advanced tools.

You can even come if you don't make jewelry but are just curious about the techniques involved in small metalworking. My hope is to build a knowledge-sharing community of practice. Everyone is welcome.

If you're not a member, this is a great way to try out TCM's jewelry tools and see if the space is for you. Bring some raw metal and have some fun!

If there are no users who bring raw metal, that is also completely okay! In that case, Abby will be there running a jewelry demonstration.

This event is for you if:

You are a TCM member who wants to make jewelry but you don't know where/how to start

You already know metalworking and want to help me build a community of practice. Make progress on a tough project, show off your work, or tackle a new idea!

You're not a member of TCM but want to make jewelry. You can try out our range of jewelry tools and equipment to learn what's what before you sink lots of money into starter tools

You want to hang out with me and drink tea and listen to jazz

Woodworking 101 (Fri, July 17, 2026)

Fri, 17 Jul 2026 23:30:00 GMT

This class will provide wood shop users with foundational skills in woodworking including planning, materials, marking, skills, and tool use.

Each of the four sessions will last two hours and start with a lesson portion. If we have any extra time, the instructors can help answer questions and consult on projects.

Tools Covered

The workbench, clamps, vices, measuring tools, squares, chisel, hand plane, bandsaw, table saw, jointer, planer, sanding station, and more.

What to Bring

Clothing suitable to the wood shop. Wear close-toed shoes and avoid loose, dangling clothing and accessories.

Eye and hearing protection is required. Dust masks and eye/ear protection are available to borrow but bringing your own is recommended.

Garden Ed: Edible Landscapes (Sat, July 18, 2026)

Sat, 18 Jul 2026 15:00:00 GMT

Join us for a series of free Gardening Education presentations, led by Hennepin County Master Gardeners, right here at Twin Cities Maker!

This workshop’s topic is Edible Landscapes:

Edible gardening is a growing trend that provides a feast for the eyes and the palate. Discover the benefits of integrating edibles with ornamental plants and learn how to care for and incorporate these beautiful and tasty plants into just about anywhere in your landscape.

Can’t make this one? Check out our calendar for the next presentations in our Gardening Education series!

Thank you to Hennepin County Master Gardeners.

Ceramics | Wheel-Throwing 101 (Mon, July 20, 2026)

Mon, 20 Jul 2026 23:00:00 GMT

Questions or trouble signing up for this class? Email ceramics@tcmaker.org.

The skills acquired in this class will the the foundation on which you can keep building with more advanced classes and/or open studio time.

Come ready to get messy. Wear clothes you don't mind getting dirty; don't worry about clay on your clothes - it washes right off! Most importantly, come ready to have fun!

This class is taught by Paola Evangelista. Artist and educator, born in Peru and based in the Twin Cities since 2019. Read more at www.paolaevangelista.com

Clothes Mending Night (Tue, July 21, 2026)

Tue, 21 Jul 2026 23:00:00 GMT

Got a piece of clothing to mend? A loved item you've worn through? A broken zipper? A torn sleeve? Don't throw it out - instead, bring it to our community mending night in the TCM artifactory!

All are welcome, members and nonmembers alike! Join us for an evening of slow fashion to make your pieces last longer and save them from the landfill. Even if you don't have something to mend, feel free to stop by for a fun evening in community.

Please fill out this form to sign up for a 30-minute time slot to have our volunteers help you out with your repair!

Fine Silver Clay Jewelry: Articulture Class @TCM (Tue, July 21, 2026)

Tue, 21 Jul 2026 23:00:00 GMT

Create real silver jewelry using metal clay, a unique and flexible medium that becomes pure silver when kiln-fired. Use provided molds, surface patterns, and textures to design jewelry that is striking and original. Students will learn basic metal clay techniques to complete 3 to 4 silver pieces such as earrings, pendants, and charms that are truly unique!

Instructor

Laura Juul

Notes

First day is mandatory.

This class is run by Articulture and hosted at Twin Cities Maker.

Open Circuits (Tue, July 21, 2026)

Wed, 22 Jul 2026 00:00:00 GMT

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

You can bring your own project for show-and-tell, to get help, or to just plan on making progress
Contribute to community projects (see list below)
Learn how to use the E-lab equipment
Connect with fellow Twin Cities Makers

Open Circuits is open to both Twin City Maker members and the public at large. We'll meet in the Twin Cities Maker Electronics Lab and spill out into the lobby as necessary.

Community Projects

(on the docket for the foreseeable future)

Raspberry-Pi-based parking permit printer for member storage
Fob-based vending machine for tools and supplies
Fob-based access control to heavy machinery
Vacuum sensors
Energy monitoring (single-phase and 3-phase)
Temperature controller for glasswork

Side Projects

Humidity sensors (e.g., for 3D filament dry boxes)
Strain gauges for weighing propane tanks
ESP32 and ESP8266 projects using Wi-Fi and MQTT

Learn new skills

Wire crimping
Oscilloscope usage
Microcontroller programming
Reverse engineering
3D modeling enclosures

It is not necessary to RSVP to this event!

Troubleshoot Tuesday (Tue, July 21, 2026)

Wed, 22 Jul 2026 00:00:00 GMT

Please sign up using this form to attend, this will help our techs prepare for your arrival!

Troubleshoot Tuesdays are run by RECA, Minnesota Tech for Success, and Free Geek Twin Cities.

Wood Shop Maintenance Night (Wed, July 22, 2026)

Wed, 22 Jul 2026 23:00:00 GMT

WOOD SHOP MAINTENANCE NIGHT

Join Us for Our Bi-Monthly Wood Shop Maintenance Nights

This time is set aside to perform tasks around making sure our tools stay in peak performance and trying to ensure that the tools stay in good working order during the month. Never repaired a tool or performed maintenance before – not a problem!! There are maintenance task for all levels of expertise – and we’ll always have at least one person around that can help you learn!

Ceramics | Wheel-Throwing: Beyond the Basics (Wed, July 22, 2026)

Wed, 22 Jul 2026 23:00:00 GMT

Questions or trouble signing up for this class? Email ceramics@tcmaker.org.

9 sessions across 3 summer months

Intermediate level

Prerequisite: Wheel Throwing 101 or equivalent experience

The breaks between modules are part of the class. Use that time to keep making on your own, let pieces dry and get fired, and arrive at the next module with fresh eyes.

This class is for you if you've completed Wheel Throwing 101 or have equivalent studio experience and are ready to work with more intention and less hand-holding in the best possible way.

Festool Domino Joiner - Basic Training (Wed, July 22, 2026)

Wed, 22 Jul 2026 23:30:00 GMT

FESTOOL DOMINO TRAINING

This class provides basic training and familiarity with the Festool Domino for you to be signed off and granted access.

Members are asked to make a $5 minimum donation to the woodshop for purchasing tool bits and other consumables, and you are encouraged to bring your own stock/scrap pieces to this class to practice joining so everyone can test the tool out and get a feel for using it.

At the end of this class members will be given access to both Festool Dominos which are secured in a locked storage cabinet.

Twin Cities Maker Open House (Wed, July 22, 2026)

Thu, 23 Jul 2026 00:00:00 GMT

Twin Cities Maker (TC Maker) is a non-profit, all volunteer run, community maker space based in the Minneapolis/St. Paul area.

Our mission is to make, share, and learn.

Learn more about us at our website! https://www.tcmaker.org/

This event is a tour only. Non-members are not permitted to operate any tools or equipment. Appropriate safety precautions MUST be taken before entering the shop.

Fiber Fun Night (Wed, July 22, 2026)

Thu, 23 Jul 2026 00:00:00 GMT

Fiber Night on Wednesday in the lobby for anyone who wants to join! We'll be working on beginning knitting and crochet but are open to any other suggestions

Email artifactory@tcmaker.org with questions!

New Member Orientation (Thu, July 23, 2026)

Thu, 23 Jul 2026 23:00:00 GMT

About this event

Orientation lasts for about 1 hour with time after for questions and support for any issues.

After you have completed orientation you will receive your fob to access the facility, which will be activated once have paid all membership fees.

If you are going to be working in the woodshop be sure to sign up for woodshop orientation immediately following this class. Check our orientations calendar to register.

All New Members are required to Pre-Register for this Orientation.

If you cannot attend an in person orientation, please reach out to membership@tcmaker.org so that we can work out special arrangements.

Wood Shop Orientation (Thu, July 23, 2026)

Fri, 24 Jul 2026 00:00:00 GMT

Wood Shop Orientation

Wood Shop Orientation is a required orientation for all woodworkers.

During Orientation we will cover basic shop safety guidelines along with best practices that are necessary to use the wood shop at Twin Cities Maker!

https://wiki.tcmaker.org/en/shop_departments/wood_shop

Electronics Repair Volunteer Training (Thu, July 23, 2026)

Fri, 24 Jul 2026 00:00:00 GMT

This training is for volunteers who are interested in helping out with electronic repair events held at TC Maker. This is an orientation four our Troubleshoot Tuesday clinics.

Chris Olson will walk trainees through fix-it clinic etiquette, demonstrate how to troubleshoot the most common repairs seen at fix-it clinics, and provide an opportunity to get hands on to build your confidence!

This training is completely free, but registration is required.

Paint Club (Thu, July 23, 2026)

Fri, 24 Jul 2026 00:30:00 GMT

At Paint Club we hang out and paint. Bring your supplies and a project.

On the first Thursday of the month we're in the classroom, otherwise we're in the Artifactory. You can just show up.

Woodworking 101 (Fri, July 24, 2026)

Fri, 24 Jul 2026 23:30:00 GMT

This class will provide wood shop users with foundational skills in woodworking including planning, materials, marking, skills, and tool use.

Each of the four sessions will last two hours and start with a lesson portion. If we have any extra time, the instructors can help answer questions and consult on projects.

Tools Covered

The workbench, clamps, vices, measuring tools, squares, chisel, hand plane, bandsaw, table saw, jointer, planer, sanding station, and more.

What to Bring

Clothing suitable to the wood shop. Wear close-toed shoes and avoid loose, dangling clothing and accessories.

Eye and hearing protection is required. Dust masks and eye/ear protection are available to borrow but bringing your own is recommended.

Intro to TIG Welding (Sat, July 25, 2026)

Sat, 25 Jul 2026 13:00:00 GMT

Get started welding! In this class, students will have the opportunity to get hands-on experience with TIG welding with steel and stainless steel. Subjects covered will include setting up the machines, material selection, safety, technique, and what makes a quality weld.

No prior experience necessary!

What to Bring

Leather boots/shoes (ideally steel toe)
Natural fiber clothing with long sleeves
Welding hood (we have some loaners at the shop, too!)
Safety glasses
Welding gloves

About the Instructor

Patrick Grace has 8 years of MIG/TIG welding experience and is certified in both Wisconsin and Minnesota. They have worked for mass production companies as well as on military ships and submarines.

Ceramics | Wheel-Throwing 101 (Mon, July 27, 2026)

Mon, 27 Jul 2026 23:00:00 GMT

Questions or trouble signing up for this class? Email ceramics@tcmaker.org.

The skills acquired in this class will the the foundation on which you can keep building with more advanced classes and/or open studio time.

Come ready to get messy. Wear clothes you don't mind getting dirty; don't worry about clay on your clothes - it washes right off! Most importantly, come ready to have fun!

This class is taught by Paola Evangelista. Artist and educator, born in Peru and based in the Twin Cities since 2019. Read more at www.paolaevangelista.com

Fine Silver Clay Jewelry: Articulture Class @TCM (Tue, July 28, 2026)

Tue, 28 Jul 2026 23:00:00 GMT

Instructor

Laura Juul

Notes

First day is mandatory.

This class is run by Articulture and hosted at Twin Cities Maker.

Open Circuits (Tue, July 28, 2026)

Wed, 29 Jul 2026 00:00:00 GMT

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

You can bring your own project for show-and-tell, to get help, or to just plan on making progress
Contribute to community projects (see list below)
Learn how to use the E-lab equipment
Connect with fellow Twin Cities Makers

Open Circuits is open to both Twin City Maker members and the public at large. We'll meet in the Twin Cities Maker Electronics Lab and spill out into the lobby as necessary.

Community Projects

(on the docket for the foreseeable future)

Raspberry-Pi-based parking permit printer for member storage
Fob-based vending machine for tools and supplies
Fob-based access control to heavy machinery
Vacuum sensors
Energy monitoring (single-phase and 3-phase)
Temperature controller for glasswork

Side Projects

Humidity sensors (e.g., for 3D filament dry boxes)
Strain gauges for weighing propane tanks
ESP32 and ESP8266 projects using Wi-Fi and MQTT

Learn new skills

Wire crimping
Oscilloscope usage
Microcontroller programming
Reverse engineering
3D modeling enclosures

It is not necessary to RSVP to this event!

Wiki & Wine: Upgrade TCM's Wiki (Tue, July 28, 2026)

Wed, 29 Jul 2026 00:00:00 GMT

What tools do we have? Where are they? What do they look like?

No experience needed! Bring a laptop since we'll likely only have one PC set up, but keep in mind this first meeting will be heavily focused on planning, styling, and structure.

We'll be starting fresh with a MediaWiki (like Wikipedia) installation, pulling from the current Wiki.js setup for source material—at least for the parts that aren't wildly out-of-date.

Drum Sander Training (Ad Hoc) (Wed, July 29, 2026)

Wed, 29 Jul 2026 07:00:00 GMT

You must Contact Darrin Minehan via email, or talk to him in person to arrange an Ad-Hoc Training Time.

Darrin will give you a Code which is needed to Purchase a Ticket for This Training.Do N

And NO - this training is not at 2am :-) !!!!!!!!!!!

Darrin, who is often around the shop weeknights after 6:30 and on weekends, has volunteered to do Ad Hoc Trainings on the Drum Sander.

Please have a copy of your receipt printed or on your phone when arriving. This training is for TCMAKER MEMBERS ONLY

PLEASE NOTE: This is a NON-REFUNDABLE ticket. Once you purchase this ticket you may not request a refund/credit for any reason.

Ceramics | Wheel-Throwing: Beyond the Basics (Wed, July 29, 2026)

Wed, 29 Jul 2026 23:00:00 GMT

Questions or trouble signing up for this class? Email ceramics@tcmaker.org.

9 sessions across 3 summer months

Intermediate level

Prerequisite: Wheel Throwing 101 or equivalent experience

The breaks between modules are part of the class. Use that time to keep making on your own, let pieces dry and get fired, and arrive at the next module with fresh eyes.

This class is for you if you've completed Wheel Throwing 101 or have equivalent studio experience and are ready to work with more intention and less hand-holding in the best possible way.

Laser Cutter Basics - Check Out Training (Wed, July 29, 2026)

Wed, 29 Jul 2026 23:00:00 GMT

To Attend this Event, You Must Purchase a Ticket From Eventbrite.

Please Click Here to Purchase a Ticket

*Please Note: Ignore the "Spaces Left" on this Event. It will always show Zero!

MUST BE A MEMBER OF TCMAKER!

Twin Cities Maker Open House (Wed, July 29, 2026)

Thu, 30 Jul 2026 00:00:00 GMT

Twin Cities Maker (TC Maker) is a non-profit, all volunteer run, community maker space based in the Minneapolis/St. Paul area.

Our mission is to make, share, and learn.

Learn more about us at our website! https://www.tcmaker.org/

This event is a tour only. Non-members are not permitted to operate any tools or equipment. Appropriate safety precautions MUST be taken before entering the shop.

Fiber Fun Night (Wed, July 29, 2026)

Thu, 30 Jul 2026 00:00:00 GMT

Fiber Night on Wednesday in the lobby for anyone who wants to join! We'll be working on beginning knitting and crochet but are open to any other suggestions

Email artifactory@tcmaker.org with questions!

Artifactory Orientation (Wed, July 29, 2026)

Thu, 30 Jul 2026 00:30:00 GMT

Orientation will be a half-hour session covering space changes, equipment and material locations, donations, cleanliness protocols, and safety procedures for new members and those who haven't been down to the Artifactory in a while.

Laser Cutter Basics - Check Out Training (Wed, July 29, 2026)

Thu, 30 Jul 2026 00:30:00 GMT

To Attend this Event, You Must Purchase a Ticket From Eventbrite.

Please Click Here to Purchase a Ticket

*Please Note: Ignore the "Spaces Left" on this Event. It will always show Zero!

MUST BE A MEMBER OF TCMAKER!

Stained Glass Orientation (Thu, July 30, 2026)

Thu, 30 Jul 2026 23:00:00 GMT

Get oriented for our stained glass supplies! We'll take a look at the tools and materials we have on hand, share some tips for success, and cover proper cleanup.

Paint Club (Thu, July 30, 2026)

Fri, 31 Jul 2026 00:30:00 GMT

At Paint Club we hang out and paint. Bring your supplies and a project.

On the first Thursday of the month we're in the classroom, otherwise we're in the Artifactory. You can just show up.

Woodworking 101 (Fri, July 31, 2026)

Fri, 31 Jul 2026 23:30:00 GMT

This class will provide wood shop users with foundational skills in woodworking including planning, materials, marking, skills, and tool use.

Each of the four sessions will last two hours and start with a lesson portion. If we have any extra time, the instructors can help answer questions and consult on projects.

Tools Covered

The workbench, clamps, vices, measuring tools, squares, chisel, hand plane, bandsaw, table saw, jointer, planer, sanding station, and more.

What to Bring

Clothing suitable to the wood shop. Wear close-toed shoes and avoid loose, dangling clothing and accessories.

Eye and hearing protection is required. Dust masks and eye/ear protection are available to borrow but bringing your own is recommended.

Smithy Reserved (Sat, August 01, 2026)

Sat, 01 Aug 2026 22:30:00 GMT

Shop Leader Celebration (Sun, August 02, 2026)

Sun, 02 Aug 2026 15:00:00 GMT

On this day we will be celebrating all of our Shop Leaders by closing down the makerspace just for them! The space will be set aside for their use from 10:00 am until 5:00 pm as we have lunch, and offer them classes!

Ceramics | Cast it in Clay: Intro to Slip Casting & Mold Making (Sun, August 02, 2026)

Sun, 02 Aug 2026 15:00:00 GMT

Questions or trouble signing up for this class? Email ceramics@tcmaker.org.

Title: Cast it in Clay: Intro to Slip Casting & Mold Making

Dates: Sundays, August 2, 9, and 16

Time: 10 am - 4 pm (lunch break 12:30 pm - 1:30 pm)

Minimum enrollment: 4

Maximum Enrollment: 8

Material Fee: $45

Registration: $150 (standard member rate)*

Total amount charged to each student for the full 3-week series (12 total contact hours), including materials: $195 (standard member rate)*

*Enrollment rates vary based on accessibility needs, whether participants are members or non-members, and a 10% discount for our volunteers. See registration panel for details.

Session 1 (August 2)

Welcome & Overview

Casting into an existing mold (instructor demonstration, followed by hands-on practice)

Discussion & takeaways

Planning your mold

homework: find or create an object to bring with you to class August 9 for making your own mold

Session 2 (August 9)

Make your mold (instructor demonstrations followed by hands-on practice)

Clay up and cottle

Mix and pour plaster

(lunch break)

Making the second half of your mold

Session 3 (August 16)

Casting with your mold

Instructor will check in with each student, review slip-pouring, and troubleshoot if there are issues with student-made molds.

Your successful cast pieces will be bisque fired at our studio. For glazing guidance, sign up for the August 23 Glazing Basics Workshop ($15 member rate).

Wood Shop Maintenance Night (Mon, August 03, 2026)

Mon, 03 Aug 2026 23:00:00 GMT

WOOD SHOP MAINTENANCE NIGHT

Join Us for Our Bi-Monthly Wood Shop Maintenance Nights

This time is set aside to perform tasks around making sure our tools stay in peak performance and trying to ensure that the tools stay in good working order during the month. Never repaired a tool or performed maintenance before – not a problem!! There are maintenance task for all levels of expertise – and we’ll always have at least one person around that can help you learn!

Jewelry Orientation (Mon, August 03, 2026)

Tue, 04 Aug 2026 00:00:00 GMT

In this orientation, you will learn each tool's role in the jewelry-making process, from cutting and forming to soldering and polishing. The Jewelry department is distinct from the Lapidary department so if you're looking for stone polishing, this department does not have that. But the skills go hand-in-hand, and I encourage you to check out that space as well!

General Know-How

Safety guidance, risks and risk mitigation
Shop rules and expectations
The mounted tools (bench pin, flex shaft, drill press, bench buffer, scroll saw)
The furnaces & kilns

Fabrication

Measuring and Marking

Calipers, rulers, dividers, scribe, center punch, stencils

Forming

Rolling mill, steel/rubber blocks, hammers & mallets, mandrels, swage blocks, wire wrapping

Cutting and Reducing

Files, sandpaper, jeweler's saw (and how to replace its blades), shears, hand cutters, rotary tool bits

Joining

Solder and when to use each type, solder picks, torch, flux, fume extraction, pickle

Polishing

Rotary tool options for detail polishing
Bench buffer for mass polishing

Various Jigs and Miscellaneous

Miter jig, wax ring blank cutting
Scrap metal rules

Casting

Wax carving and mold creation
Red sand / delft clay casting
Investment casting — This will be a general overview of the tools. The process is VERY involved; keep an eye on WA for a full class in the future!

Conclusion

We will end by discussing what's next for the jewelry department, how to get involved, and where to find resources for learning more.

Happy making!
~Abby

Garden Ed: Small Space Gardening (Mon, August 03, 2026)

Tue, 04 Aug 2026 00:00:00 GMT

Join us for a series of free Gardening Education presentations, led by Hennepin County Master Gardeners, right here at Twin Cities Maker!

This workshop’s topic is Small Space Gardening (Square Foot Gardening):

Are you limited by garden space or interested in increasing the density of your garden to increase harvest? This class covers basic square foot gardening techniques, succession planting and management.

Can’t make this one? Check out our calendar for the next presentations in our Gardening Education series!

Thank you to Hennepin County Master Gardeners.

Fine Silver Clay Jewelry: Articulture Class @TCM (Tue, August 04, 2026)

Tue, 04 Aug 2026 23:00:00 GMT

Instructor

Laura Juul

Notes

First day is mandatory.

This class is run by Articulture and hosted at Twin Cities Maker.

Open Circuits (Tue, August 04, 2026)

Wed, 05 Aug 2026 00:00:00 GMT

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

You can bring your own project for show-and-tell, to get help, or to just plan on making progress
Contribute to community projects (see list below)
Learn how to use the E-lab equipment
Connect with fellow Twin Cities Makers

Open Circuits is open to both Twin City Maker members and the public at large. We'll meet in the Twin Cities Maker Electronics Lab and spill out into the lobby as necessary.

Community Projects

(on the docket for the foreseeable future)

Raspberry-Pi-based parking permit printer for member storage
Fob-based vending machine for tools and supplies
Fob-based access control to heavy machinery
Vacuum sensors
Energy monitoring (single-phase and 3-phase)
Temperature controller for glasswork

Side Projects

Humidity sensors (e.g., for 3D filament dry boxes)
Strain gauges for weighing propane tanks
ESP32 and ESP8266 projects using Wi-Fi and MQTT

Learn new skills

Wire crimping
Oscilloscope usage
Microcontroller programming
Reverse engineering
3D modeling enclosures

It is not necessary to RSVP to this event!

Troubleshoot Tuesday (Tue, August 04, 2026)

Wed, 05 Aug 2026 00:00:00 GMT

Please sign up using this form to attend, this will help our techs prepare for your arrival!

Troubleshoot Tuesdays are run by RECA, Minnesota Tech for Success, and Free Geek Twin Cities.

Troubleshoot Tuesdays occur on the 1st and 3rd Tuesday of each month.

Laser Cutter Basics - Check Out Training (Wed, August 05, 2026)

Wed, 05 Aug 2026 23:00:00 GMT

To Attend this Event, You Must Purchase a Ticket From Eventbrite.

Please Click Here to Purchase a Ticket

*Please Note: Ignore the "Spaces Left" on this Event. It will always show Zero!

MUST BE A MEMBER OF TCMAKER!

Twin Cities Maker Open House (Wed, August 05, 2026)

Thu, 06 Aug 2026 00:00:00 GMT

Twin Cities Maker (TC Maker) is a non-profit, all volunteer run, community maker space based in the Minneapolis/St. Paul area.

Our mission is to make, share, and learn.

Learn more about us at our website! https://www.tcmaker.org/

This event is a tour only. Non-members are not permitted to operate any tools or equipment. Appropriate safety precautions MUST be taken before entering the shop.

Fiber Fun Night (Wed, August 05, 2026)

Thu, 06 Aug 2026 00:00:00 GMT

Fiber Night on Wednesday in the lobby for anyone who wants to join! We'll be working on beginning knitting and crochet but are open to any other suggestions

Email artifactory@tcmaker.org with questions!

Artifactory Orientation (Wed, August 05, 2026)

Thu, 06 Aug 2026 00:30:00 GMT

Laser Cutter Basics - Check Out Training (Wed, August 05, 2026)

Thu, 06 Aug 2026 00:30:00 GMT

To Attend this Event, You Must Purchase a Ticket From Eventbrite.

Please Click Here to Purchase a Ticket

*Please Note: Ignore the "Spaces Left" on this Event. It will always show Zero!

MUST BE A MEMBER OF TCMAKER!

New Member Orientation (Thu, August 06, 2026)

Thu, 06 Aug 2026 23:00:00 GMT

About this event

Orientation lasts for about 1 hour with time after for questions and support for any issues.

After you have completed orientation you will receive your fob to access the facility, which will be activated once have paid all membership fees.

If you are going to be working in the woodshop be sure to sign up for woodshop orientation immediately following this class. Check our orientations calendar to register.

All New Members are required to Pre-Register for this Orientation.

If you cannot attend an in person orientation, please reach out to membership@tcmaker.org so that we can work out special arrangements.

Wood Shop Orientation (Thu, August 06, 2026)

Fri, 07 Aug 2026 00:00:00 GMT

Wood Shop Orientation

Wood Shop Orientation is a required orientation for all woodworkers.

During Orientation we will cover basic shop safety guidelines along with best practices that are necessary to use the wood shop at Twin Cities Maker!

https://wiki.tcmaker.org/en/shop_departments/wood_shop

Wiki & Wine: Upgrade TCM's Wiki (Thu, August 06, 2026)

Fri, 07 Aug 2026 00:00:00 GMT

What tools do we have? Where are they? What do they look like?

No experience needed! Bring a laptop since we'll likely only have one PC set up, but keep in mind this first meeting will be heavily focused on planning, styling, and structure.

We'll be starting fresh with a MediaWiki (like Wikipedia) installation, pulling from the current Wiki.js setup for source material—at least for the parts that aren't wildly out-of-date.

Twin Cites Queer Open Mic at TCM (Thu, August 06, 2026)

Fri, 07 Aug 2026 00:30:00 GMT

Join us for an evening of creativity, connection, and community as Twin Cities Queer Open Mic comes to Twin Cities Maker! This open mic celebrates all forms of expression—whether it’s singing, music, poetry, spoken word, visual art, performance, or whatever wild and wonderful ideas our community brings to the stage.

Everyone is welcome to share, or just come to listen, cheer, and enjoy the energy of queer voices and creativity. Bring your art, your words, your songs—or just bring yourself.

Paint Club (Thu, August 06, 2026)

Fri, 07 Aug 2026 00:30:00 GMT

At Paint Club we hang out and paint. Bring your supplies and a project.

On the first Thursday of the month we're in the classroom, otherwise we're in the Artifactory. You can just show up.

CNC Orientation (Fri, August 07, 2026)

Fri, 07 Aug 2026 23:30:00 GMT

Join this in-person orientation to learn more about the CNC routers at Twin Cities Maker.

Orientation will start in the classroom—not the CNC room.

Agenda:

Overview of the CNC routers
Rules and Restrictions
How to get Signed-off
Demonstration of toolpath generation using VCarve
Demo cut on Shapeoko or the 4' × 8' Sequoyatec

CNC orientation is generally held on the second Friday of the month.

Quarterly Cleanup (Sat, August 08, 2026)

Sat, 08 Aug 2026 13:00:00 GMT

It’s time for our Quarterly Cleanup! This is when we come together as a community to care for our shop, tackle big improvement projects, and put energy into making the space better for everyone. From deep cleaning to shop upgrades, your help makes a lasting difference.

Quarterly Cleanup is about more than just chores; it’s about strengthening our community, building pride in our shared space, and spending time together. Whether you’ve been around for years or are brand new, it’s a great way to get involved and connect with others.

Screen Printing - 101 (Sat, August 08, 2026)

Sat, 08 Aug 2026 15:00:00 GMT

After this class you'll have a general understanding of how to operate the screen printing equipment along with the basic principles of screen printing.

Besides learning about the screen printing equipment, you'll learn about shop policies & safety, practical applications of screen printing, how to chose a good image for screen printing, and acceptable surfaces that will screen print well.

Tools Covered

Power Washer
Exposure Unit
Safe Light
Screen Machine
Mobile Screen Station

What to Bring/Wear

Wear comfortable shop cloths, something you don't mind getting ink on
Hearing Protection is suggested, as sometimes it gets loud.

About the Instructor

Rick Strohmeyer has been a long time member of Twin Cities Maker. After receiving his Bachelor of Fine Arets in printmaking, he has enjoyed sharing his knowledge he has learned while being a a print-maker, painter and general designer.

Ceramics | Cast it in Clay: Intro to Slip Casting & Mold Making (Sun, August 09, 2026)

Sun, 09 Aug 2026 15:00:00 GMT

Questions or trouble signing up for this class? Email ceramics@tcmaker.org.

Title: Cast it in Clay: Intro to Slip Casting & Mold Making

Dates: Sundays, August 2, 9, and 16

Time: 10 am - 4 pm (lunch break 12:30 pm - 1:30 pm)

Minimum enrollment: 4

Maximum Enrollment: 8

Material Fee: $45

Registration: $150 (standard member rate)*

Total amount charged to each student for the full 3-week series (12 total contact hours), including materials: $195 (standard member rate)*

*Enrollment rates vary based on accessibility needs, whether participants are members or non-members, and a 10% discount for our volunteers. See registration panel for details.

Session 1 (August 2)

Welcome & Overview

Casting into an existing mold (instructor demonstration, followed by hands-on practice)

Discussion & takeaways

Planning your mold

homework: find or create an object to bring with you to class August 9 for making your own mold

Session 2 (August 9)

Make your mold (instructor demonstrations followed by hands-on practice)

Clay up and cottle

Mix and pour plaster

(lunch break)

Making the second half of your mold

Session 3 (August 16)

Casting with your mold

Instructor will check in with each student, review slip-pouring, and troubleshoot if there are issues with student-made molds.

Your successful cast pieces will be bisque fired at our studio. For glazing guidance, sign up for the August 23 Glazing Basics Workshop ($15 member rate).

Metal Shop Orientation (Mon, August 10, 2026)

Mon, 10 Aug 2026 23:00:00 GMT

Please be on time and let me know if you cannot attend. Thank you

Twin Cities Maker Quarterly Finance Committee Meeting (Tue, August 11, 2026)

Tue, 11 Aug 2026 23:00:00 GMT

We encourage all members to attend our Finance Committee meetings!

The Finance Committee meets publicly on the 2nd Tuesday of the 1st month of each quarter. This meeting is open to members of Twin Cities Maker and is an opportunity for them to understand our finances and review our quarterly finance reports.

All Finance Committee meeting are held in person in the Artifactory as well as virtually online. To join the meeting online please visit https://go.tcmaker.org/boardmeeting

Open Circuits (Tue, August 11, 2026)

Wed, 12 Aug 2026 00:00:00 GMT

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

You can bring your own project for show-and-tell, to get help, or to just plan on making progress
Contribute to community projects (see list below)
Learn how to use the E-lab equipment
Connect with fellow Twin Cities Makers

Open Circuits is open to both Twin City Maker members and the public at large. We'll meet in the Twin Cities Maker Electronics Lab and spill out into the lobby as necessary.

Community Projects

(on the docket for the foreseeable future)

Raspberry-Pi-based parking permit printer for member storage
Fob-based vending machine for tools and supplies
Fob-based access control to heavy machinery
Vacuum sensors
Energy monitoring (single-phase and 3-phase)
Temperature controller for glasswork

Side Projects

Humidity sensors (e.g., for 3D filament dry boxes)
Strain gauges for weighing propane tanks
ESP32 and ESP8266 projects using Wi-Fi and MQTT

Learn new skills

Wire crimping
Oscilloscope usage
Microcontroller programming
Reverse engineering
3D modeling enclosures

It is not necessary to RSVP to this event!

Wiki & Wine: Upgrade TCM's Wiki (Tue, August 11, 2026)

Wed, 12 Aug 2026 00:00:00 GMT

What tools do we have? Where are they? What do they look like?

No experience needed! Bring a laptop since we'll likely only have one PC set up, but keep in mind this first meeting will be heavily focused on planning, styling, and structure.

We'll be starting fresh with a MediaWiki (like Wikipedia) installation, pulling from the current Wiki.js setup for source material—at least for the parts that aren't wildly out-of-date.

Ceramics | Wheel-Throwing: Beyond the Basics (Wed, August 12, 2026)

Wed, 12 Aug 2026 23:00:00 GMT

Questions or trouble signing up for this class? Email ceramics@tcmaker.org.

9 sessions across 3 summer months

Intermediate level

Prerequisite: Wheel Throwing 101 or equivalent experience

The breaks between modules are part of the class. Use that time to keep making on your own, let pieces dry and get fired, and arrive at the next module with fresh eyes.

This class is for you if you've completed Wheel Throwing 101 or have equivalent studio experience and are ready to work with more intention and less hand-holding in the best possible way.

Twin Cities Maker Open House (Wed, August 12, 2026)

Thu, 13 Aug 2026 00:00:00 GMT

Twin Cities Maker (TC Maker) is a non-profit, all volunteer run, community maker space based in the Minneapolis/St. Paul area.

Our mission is to make, share, and learn.

Learn more about us at our website! https://www.tcmaker.org/

This event is a tour only. Non-members are not permitted to operate any tools or equipment. Appropriate safety precautions MUST be taken before entering the shop.

Fiber Fun Night (Wed, August 12, 2026)

Thu, 13 Aug 2026 00:00:00 GMT

Fiber Night on Wednesday in the lobby for anyone who wants to join! We'll be working on beginning knitting and crochet but are open to any other suggestions

Email artifactory@tcmaker.org with questions!

Paint Club (Thu, August 13, 2026)

Fri, 14 Aug 2026 00:30:00 GMT

At Paint Club we hang out and paint. Bring your supplies and a project.

On the first Thursday of the month we're in the classroom, otherwise we're in the Artifactory. You can just show up.

Garden Ed: Using Rain Gardens (Sat, August 15, 2026)

Sat, 15 Aug 2026 15:00:00 GMT

Join us for a series of free Gardening Education presentations, led by Hennepin County Master Gardeners, right here at Twin Cities Maker!

This workshop’s topic is Using Rain Gardens:

A rain garden is a bowl-shaped garden designed to absorb excess rainwater run-off from a house and its associated landscape. Learn how having a rain garden benefits the environment, how to make one and what plants are suitable.

Can’t make this one? Check out our calendar for the next presentations in our Gardening Education series!

Thank you to Hennepin County Master Gardeners.

Ceramics | Cast it in Clay: Intro to Slip Casting & Mold Making (Sun, August 16, 2026)

Sun, 16 Aug 2026 15:00:00 GMT

Questions or trouble signing up for this class? Email ceramics@tcmaker.org.

Title: Cast it in Clay: Intro to Slip Casting & Mold Making

Dates: Sundays, August 2, 9, and 16

Time: 10 am - 4 pm (lunch break 12:30 pm - 1:30 pm)

Minimum enrollment: 4

Maximum Enrollment: 8

Material Fee: $45

Registration: $150 (standard member rate)*

Total amount charged to each student for the full 3-week series (12 total contact hours), including materials: $195 (standard member rate)*

*Enrollment rates vary based on accessibility needs, whether participants are members or non-members, and a 10% discount for our volunteers. See registration panel for details.

Session 1 (August 2)

Welcome & Overview

Casting into an existing mold (instructor demonstration, followed by hands-on practice)

Discussion & takeaways

Planning your mold

homework: find or create an object to bring with you to class August 9 for making your own mold

Session 2 (August 9)

Make your mold (instructor demonstrations followed by hands-on practice)

Clay up and cottle

Mix and pour plaster

(lunch break)

Making the second half of your mold

Session 3 (August 16)

Casting with your mold

Instructor will check in with each student, review slip-pouring, and troubleshoot if there are issues with student-made molds.

Your successful cast pieces will be bisque fired at our studio. For glazing guidance, sign up for the August 23 Glazing Basics Workshop ($15 member rate).

Handmade Block Prints: Articulture Class @TCM (Tue, August 18, 2026)

Tue, 18 Aug 2026 23:00:00 GMT

This workshop will explore the art of block printing, one of the more accessible of printing styles. Students will start out by planning their image idea, and then learn basic carving and inking techniques in prep of the final process of printing their block. A small edition of original numbered fine art prints will be run. If time permits, participants can take another step to dive into reductive printmaking, by additional carving away parts of the original block, to then add another layer with a different ink color. The possibilities of this unique art form are truly endless!

Instructor

Eva Adderley

This class is run by Articulture and hosted at Twin Cities Maker.

Open Circuits (Tue, August 18, 2026)

Wed, 19 Aug 2026 00:00:00 GMT

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

You can bring your own project for show-and-tell, to get help, or to just plan on making progress
Contribute to community projects (see list below)
Learn how to use the E-lab equipment
Connect with fellow Twin Cities Makers

Open Circuits is open to both Twin City Maker members and the public at large. We'll meet in the Twin Cities Maker Electronics Lab and spill out into the lobby as necessary.

Community Projects

(on the docket for the foreseeable future)

Raspberry-Pi-based parking permit printer for member storage
Fob-based vending machine for tools and supplies
Fob-based access control to heavy machinery
Vacuum sensors
Energy monitoring (single-phase and 3-phase)
Temperature controller for glasswork

Side Projects

Humidity sensors (e.g., for 3D filament dry boxes)
Strain gauges for weighing propane tanks
ESP32 and ESP8266 projects using Wi-Fi and MQTT

Learn new skills

Wire crimping
Oscilloscope usage
Microcontroller programming
Reverse engineering
3D modeling enclosures

It is not necessary to RSVP to this event!

Wood Shop Maintenance Night (Wed, August 19, 2026)

Wed, 19 Aug 2026 23:00:00 GMT

WOOD SHOP MAINTENANCE NIGHT

Join Us for Our Bi-Monthly Wood Shop Maintenance Nights

This time is set aside to perform tasks around making sure our tools stay in peak performance and trying to ensure that the tools stay in good working order during the month. Never repaired a tool or performed maintenance before – not a problem!! There are maintenance task for all levels of expertise – and we’ll always have at least one person around that can help you learn!

Ceramics | Wheel-Throwing: Beyond the Basics (Wed, August 19, 2026)

Wed, 19 Aug 2026 23:00:00 GMT

Questions or trouble signing up for this class? Email ceramics@tcmaker.org.

9 sessions across 3 summer months

Intermediate level

Prerequisite: Wheel Throwing 101 or equivalent experience

The breaks between modules are part of the class. Use that time to keep making on your own, let pieces dry and get fired, and arrive at the next module with fresh eyes.

This class is for you if you've completed Wheel Throwing 101 or have equivalent studio experience and are ready to work with more intention and less hand-holding in the best possible way.

Laser Cutter Basics - Check Out Training (Wed, August 19, 2026)

Wed, 19 Aug 2026 23:00:00 GMT

To Attend this Event, You Must Purchase a Ticket From Eventbrite.

Please Click Here to Purchase a Ticket

*Please Note: Ignore the "Spaces Left" on this Event. It will always show Zero!

MUST BE A MEMBER OF TCMAKER!

Festool Domino Joiner - Basic Training (Wed, August 19, 2026)

Wed, 19 Aug 2026 23:30:00 GMT

FESTOOL DOMINO TRAINING

This class provides basic training and familiarity with the Festool Domino for you to be signed off and granted access.

At the end of this class members will be given access to both Festool Dominos which are secured in a locked storage cabinet.

Twin Cities Maker Open House (Wed, August 19, 2026)

Thu, 20 Aug 2026 00:00:00 GMT

Twin Cities Maker (TC Maker) is a non-profit, all volunteer run, community maker space based in the Minneapolis/St. Paul area.

Our mission is to make, share, and learn.

Learn more about us at our website! https://www.tcmaker.org/

This event is a tour only. Non-members are not permitted to operate any tools or equipment. Appropriate safety precautions MUST be taken before entering the shop.

Fiber Fun Night (Wed, August 19, 2026)

Thu, 20 Aug 2026 00:00:00 GMT

Fiber Night on Wednesday in the lobby for anyone who wants to join! We'll be working on beginning knitting and crochet but are open to any other suggestions

Email artifactory@tcmaker.org with questions!

Laser Cutter Basics - Check Out Training (Wed, August 19, 2026)

Thu, 20 Aug 2026 00:30:00 GMT

To Attend this Event, You Must Purchase a Ticket From Eventbrite.

Please Click Here to Purchase a Ticket

*Please Note: Ignore the "Spaces Left" on this Event. It will always show Zero!

MUST BE A MEMBER OF TCMAKER!

New Member Orientation (Thu, August 20, 2026)

Thu, 20 Aug 2026 23:00:00 GMT

About this event

Orientation lasts for about 1 hour with time after for questions and support for any issues.

After you have completed orientation you will receive your fob to access the facility, which will be activated once have paid all membership fees.

If you are going to be working in the woodshop be sure to sign up for woodshop orientation immediately following this class. Check our orientations calendar to register.

All New Members are required to Pre-Register for this Orientation.

If you cannot attend an in person orientation, please reach out to membership@tcmaker.org so that we can work out special arrangements.

3D Plastics Repair Clinic (Thu, August 20, 2026)

Thu, 20 Aug 2026 23:00:00 GMT

Broken appliance or children's toy? Lost the battery cover on your remote? Don't throw it out - instead, bring it to a plastics repair clinic at Twin Cities Maker!

Once a month, join us for an evening of repair in our 3D Printing Lab. Our volunteers will help diagnose and guide your repair.

Here are examples of what our volunteers are able to help you with:

Keyboard tabs
Backpack buckles
Office chair wheels
Key fobs
Remote control covers
Plastic tote fasteners

Wood Shop Orientation (Thu, August 20, 2026)

Fri, 21 Aug 2026 00:00:00 GMT

Wood Shop Orientation

Wood Shop Orientation is a required orientation for all woodworkers.

During Orientation we will cover basic shop safety guidelines along with best practices that are necessary to use the wood shop at Twin Cities Maker!

https://wiki.tcmaker.org/en/shop_departments/wood_shop

Wiki & Wine: Upgrade TCM's Wiki (Thu, August 20, 2026)

Fri, 21 Aug 2026 00:00:00 GMT

What tools do we have? Where are they? What do they look like?

No experience needed! Bring a laptop since we'll likely only have one PC set up, but keep in mind this first meeting will be heavily focused on planning, styling, and structure.

We'll be starting fresh with a MediaWiki (like Wikipedia) installation, pulling from the current Wiki.js setup for source material—at least for the parts that aren't wildly out-of-date.

Paint Club (Thu, August 20, 2026)

Fri, 21 Aug 2026 00:30:00 GMT

At Paint Club we hang out and paint. Bring your supplies and a project.

On the first Thursday of the month we're in the classroom, otherwise we're in the Artifactory. You can just show up.

Open Circuits (Tue, August 25, 2026)

Wed, 26 Aug 2026 00:00:00 GMT

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

You can bring your own project for show-and-tell, to get help, or to just plan on making progress
Contribute to community projects (see list below)
Learn how to use the E-lab equipment
Connect with fellow Twin Cities Makers

Open Circuits is open to both Twin City Maker members and the public at large. We'll meet in the Twin Cities Maker Electronics Lab and spill out into the lobby as necessary.

Community Projects

(on the docket for the foreseeable future)

Raspberry-Pi-based parking permit printer for member storage
Fob-based vending machine for tools and supplies
Fob-based access control to heavy machinery
Vacuum sensors
Energy monitoring (single-phase and 3-phase)
Temperature controller for glasswork

Side Projects

Humidity sensors (e.g., for 3D filament dry boxes)
Strain gauges for weighing propane tanks
ESP32 and ESP8266 projects using Wi-Fi and MQTT

Learn new skills

Wire crimping
Oscilloscope usage
Microcontroller programming
Reverse engineering
3D modeling enclosures

It is not necessary to RSVP to this event!

Wiki & Wine: Upgrade TCM's Wiki (Tue, August 25, 2026)

Wed, 26 Aug 2026 00:00:00 GMT

What tools do we have? Where are they? What do they look like?

No experience needed! Bring a laptop since we'll likely only have one PC set up, but keep in mind this first meeting will be heavily focused on planning, styling, and structure.

We'll be starting fresh with a MediaWiki (like Wikipedia) installation, pulling from the current Wiki.js setup for source material—at least for the parts that aren't wildly out-of-date.

Ceramics | Wheel-Throwing: Beyond the Basics (Wed, August 26, 2026)

Wed, 26 Aug 2026 23:00:00 GMT

Questions or trouble signing up for this class? Email ceramics@tcmaker.org.

9 sessions across 3 summer months

Intermediate level

Prerequisite: Wheel Throwing 101 or equivalent experience

The breaks between modules are part of the class. Use that time to keep making on your own, let pieces dry and get fired, and arrive at the next module with fresh eyes.

This class is for you if you've completed Wheel Throwing 101 or have equivalent studio experience and are ready to work with more intention and less hand-holding in the best possible way.

Laser Cutter Basics - Check Out Training (Wed, August 26, 2026)

Wed, 26 Aug 2026 23:00:00 GMT

To Attend this Event, You Must Purchase a Ticket From Eventbrite.

Please Click Here to Purchase a Ticket

*Please Note: Ignore the "Spaces Left" on this Event. It will always show Zero!

MUST BE A MEMBER OF TCMAKER!

Twin Cities Maker Open House (Wed, August 26, 2026)

Thu, 27 Aug 2026 00:00:00 GMT

Twin Cities Maker (TC Maker) is a non-profit, all volunteer run, community maker space based in the Minneapolis/St. Paul area.

Our mission is to make, share, and learn.

Learn more about us at our website! https://www.tcmaker.org/

This event is a tour only. Non-members are not permitted to operate any tools or equipment. Appropriate safety precautions MUST be taken before entering the shop.

Fiber Fun Night (Wed, August 26, 2026)

Thu, 27 Aug 2026 00:00:00 GMT

Fiber Night on Wednesday in the lobby for anyone who wants to join! We'll be working on beginning knitting and crochet but are open to any other suggestions

Email artifactory@tcmaker.org with questions!

Artifactory Orientation (Wed, August 26, 2026)

Thu, 27 Aug 2026 00:30:00 GMT

Laser Cutter Basics - Check Out Training (Wed, August 26, 2026)

Thu, 27 Aug 2026 00:30:00 GMT

To Attend this Event, You Must Purchase a Ticket From Eventbrite.

Please Click Here to Purchase a Ticket

*Please Note: Ignore the "Spaces Left" on this Event. It will always show Zero!

MUST BE A MEMBER OF TCMAKER!

Paint Club (Thu, August 27, 2026)

Fri, 28 Aug 2026 00:30:00 GMT

At Paint Club we hang out and paint. Bring your supplies and a project.

On the first Thursday of the month we're in the classroom, otherwise we're in the Artifactory. You can just show up.

Drum Sander Training (Ad Hoc) (Sat, August 29, 2026)

Sat, 29 Aug 2026 07:00:00 GMT

You must Contact Darrin Minehan via email, or talk to him in person to arrange an Ad-Hoc Training Time.

Darrin will give you a Code which is needed to Purchase a Ticket for This Training.Do N

And NO - this training is not at 2am :-) !!!!!!!!!!!

Darrin, who is often around the shop weeknights after 6:30 and on weekends, has volunteered to do Ad Hoc Trainings on the Drum Sander.

Please have a copy of your receipt printed or on your phone when arriving. This training is for TCMAKER MEMBERS ONLY

PLEASE NOTE: This is a NON-REFUNDABLE ticket. Once you purchase this ticket you may not request a refund/credit for any reason.

Introduction to MIG Welding (Sat, August 29, 2026)

Sat, 29 Aug 2026 15:00:00 GMT

Add welding to your DIY skillset with this introductory course.

Learn the basics of MIG welding and walk away with your own small wall-mounted coat hanger. In this class you will learn a basic welding framework to use on your own projects at home or in the TC Maker shop. Safety, machine basics, gas choice and set-up, as well as basic tools will all be covered. For folks starting from zero knowledge to those who have welded in the past and would like to brush-up, this class emphasizes that everyone can be a welder and make their own project dreams come true. Class size is kept small to encourage participation and time with the instructor.

What to Bring

Bring a pair of welding gloves. Recommendations are ones that are thinner for dexterity. Examples are Black Stallion MIG gloves or Vulcan TIG gloves (both work for MIG welding).

Participants should be wearing close-toed shoes and clothing that is 100% cotton or wool. Jeans or similar material without holes are also recommended. No synthetic fibers. Improper attire may require participants to withdraw at time of class without refund. If you have questions regarding proper attire, please reach out to the instructor.

Refund Policy

Up To 7 Days Before the Event Starts.

About the Instructor

Cory Due is a local 539 pipefitter who focuses on service work and HVAC after earning a welding degree at MCTC and working in a fabrication shop and on the construction side of the pipefitters union. They have both a welding degree and HVAC degree and largely work on commercial systems. They enjoy teaching and making mechanical concepts more accessible to all. When they aren't teaching they're scheming about house projects, tending to their garden, or spending time with their family and menagerie of animals.

Garden Ed: Growing and Using Herbs (Mon, August 31, 2026)

Tue, 01 Sep 2026 00:00:00 GMT

Join us for a series of free Gardening Education presentations, led by Hennepin County Master Gardeners, right here at Twin Cities Maker!

This workshop’s topic is Growing and Using Herbs:

Are you planning on growing herbs in the upcoming growing season? Take the mystery out of growing, harvesting and storing herbs. Learn how these easy to grow plants can be used in landscaping to add variety and attract pollinators, as well as in cooking, home decorating, and more! You will also receive a handout as part of the class.

Can’t make this one? Check out our calendar for the next presentations in our Gardening Education series!

Thank you to Hennepin County Master Gardeners.

Open Circuits (Tue, September 01, 2026)

Wed, 02 Sep 2026 00:00:00 GMT

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

You can bring your own project for show-and-tell, to get help, or to just plan on making progress
Contribute to community projects (see list below)
Learn how to use the E-lab equipment
Connect with fellow Twin Cities Makers

Open Circuits is open to both Twin City Maker members and the public at large. We'll meet in the Twin Cities Maker Electronics Lab and spill out into the lobby as necessary.

Community Projects

(on the docket for the foreseeable future)

Raspberry-Pi-based parking permit printer for member storage
Fob-based vending machine for tools and supplies
Fob-based access control to heavy machinery
Vacuum sensors
Energy monitoring (single-phase and 3-phase)
Temperature controller for glasswork

Side Projects

Humidity sensors (e.g., for 3D filament dry boxes)
Strain gauges for weighing propane tanks
ESP32 and ESP8266 projects using Wi-Fi and MQTT

Learn new skills

Wire crimping
Oscilloscope usage
Microcontroller programming
Reverse engineering
3D modeling enclosures

It is not necessary to RSVP to this event!

Twin Cities Maker Open House (Wed, September 02, 2026)

Thu, 03 Sep 2026 00:00:00 GMT

Twin Cities Maker (TC Maker) is a non-profit, all volunteer run, community maker space based in the Minneapolis/St. Paul area.

Our mission is to make, share, and learn.

Learn more about us at our website! https://www.tcmaker.org/

This event is a tour only. Non-members are not permitted to operate any tools or equipment. Appropriate safety precautions MUST be taken before entering the shop.

Fiber Fun Night (Wed, September 02, 2026)

Thu, 03 Sep 2026 00:00:00 GMT

Fiber Night on Wednesday in the lobby for anyone who wants to join! We'll be working on beginning knitting and crochet but are open to any other suggestions

Email artifactory@tcmaker.org with questions!

New Member Orientation (Thu, September 03, 2026)

Thu, 03 Sep 2026 23:00:00 GMT

About this event

Orientation lasts for about 1 hour with time after for questions and support for any issues.

After you have completed orientation you will receive your fob to access the facility, which will be activated once have paid all membership fees.

If you are going to be working in the woodshop be sure to sign up for woodshop orientation immediately following this class. Check our orientations calendar to register.

All New Members are required to Pre-Register for this Orientation.

If you cannot attend an in person orientation, please reach out to membership@tcmaker.org so that we can work out special arrangements.

Wood Shop Orientation (Thu, September 03, 2026)

Fri, 04 Sep 2026 00:00:00 GMT

Wood Shop Orientation

Wood Shop Orientation is a required orientation for all woodworkers.

During Orientation we will cover basic shop safety guidelines along with best practices that are necessary to use the wood shop at Twin Cities Maker!

https://wiki.tcmaker.org/en/shop_departments/wood_shop

Twin Cites Queer Open Mic at TCM (Thu, September 03, 2026)

Fri, 04 Sep 2026 00:30:00 GMT

Everyone is welcome to share, or just come to listen, cheer, and enjoy the energy of queer voices and creativity. Bring your art, your words, your songs—or just bring yourself.

Wood Shop Maintenance Night (Mon, September 07, 2026)

Mon, 07 Sep 2026 23:00:00 GMT

WOOD SHOP MAINTENANCE NIGHT

Join Us for Our Bi-Monthly Wood Shop Maintenance Nights

This time is set aside to perform tasks around making sure our tools stay in peak performance and trying to ensure that the tools stay in good working order during the month. Never repaired a tool or performed maintenance before – not a problem!! There are maintenance task for all levels of expertise – and we’ll always have at least one person around that can help you learn!

Jewelry Orientation (Mon, September 07, 2026)

Tue, 08 Sep 2026 00:00:00 GMT

General Know-How

Safety guidance, risks and risk mitigation
Shop rules and expectations
The mounted tools (bench pin, flex shaft, drill press, bench buffer, scroll saw)
The furnaces & kilns

Fabrication

Measuring and Marking

Calipers, rulers, dividers, scribe, center punch, stencils

Forming

Rolling mill, steel/rubber blocks, hammers & mallets, mandrels, swage blocks, wire wrapping

Cutting and Reducing

Files, sandpaper, jeweler's saw (and how to replace its blades), shears, hand cutters, rotary tool bits

Joining

Solder and when to use each type, solder picks, torch, flux, fume extraction, pickle

Polishing

Rotary tool options for detail polishing
Bench buffer for mass polishing

Various Jigs and Miscellaneous

Miter jig, wax ring blank cutting
Scrap metal rules

Casting

Wax carving and mold creation
Red sand / delft clay casting
Investment casting — This will be a general overview of the tools. The process is VERY involved; keep an eye on WA for a full class in the future!

Conclusion

We will end by discussing what's next for the jewelry department, how to get involved, and where to find resources for learning more.

Happy making!
~Abby

Twin Cities Maker Quarterly Board Meeting (Tue, September 08, 2026)

Tue, 08 Sep 2026 23:00:00 GMT

We encourage all members to attend our board meetings!

The Board Meetings are normally held on the 2nd Tuesday of the 2nd month of each quarter, but may fluctuate depending on Board Member schedules/holidays. Please refer to our calendar of events for dates and times of all meetings.

All board meeting are held in person in the Artifactory as well as virtually online. To join the meeting online please visit https://go.tcmaker.org/boardmeeting

To view the agenda for this meeting, please visit this link.

To request an item to be added to the agenda, please contact President@TCMaker.org at least 5 days prior to any board meeting.

Open Circuits (Tue, September 08, 2026)

Wed, 09 Sep 2026 00:00:00 GMT

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

You can bring your own project for show-and-tell, to get help, or to just plan on making progress
Contribute to community projects (see list below)
Learn how to use the E-lab equipment
Connect with fellow Twin Cities Makers

Open Circuits is open to both Twin City Maker members and the public at large. We'll meet in the Twin Cities Maker Electronics Lab and spill out into the lobby as necessary.

Community Projects

(on the docket for the foreseeable future)

Raspberry-Pi-based parking permit printer for member storage
Fob-based vending machine for tools and supplies
Fob-based access control to heavy machinery
Vacuum sensors
Energy monitoring (single-phase and 3-phase)
Temperature controller for glasswork

Side Projects

Humidity sensors (e.g., for 3D filament dry boxes)
Strain gauges for weighing propane tanks
ESP32 and ESP8266 projects using Wi-Fi and MQTT

Learn new skills

Wire crimping
Oscilloscope usage
Microcontroller programming
Reverse engineering
3D modeling enclosures

It is not necessary to RSVP to this event!

Twin Cities Maker Open House (Wed, September 09, 2026)

Thu, 10 Sep 2026 00:00:00 GMT

Twin Cities Maker (TC Maker) is a non-profit, all volunteer run, community maker space based in the Minneapolis/St. Paul area.

Our mission is to make, share, and learn.

Learn more about us at our website! https://www.tcmaker.org/

This event is a tour only. Non-members are not permitted to operate any tools or equipment. Appropriate safety precautions MUST be taken before entering the shop.

Fiber Fun Night (Wed, September 09, 2026)

Thu, 10 Sep 2026 00:00:00 GMT

Fiber Night on Wednesday in the lobby for anyone who wants to join! We'll be working on beginning knitting and crochet but are open to any other suggestions

Email artifactory@tcmaker.org with questions!

Introduction to MIG Welding (Sat, September 12, 2026)

Sat, 12 Sep 2026 15:00:00 GMT

Add welding to your DIY skillset with this introductory course.

What to Bring

Bring a pair of welding gloves. Recommendations are ones that are thinner for dexterity. Examples are Black Stallion MIG gloves or Vulcan TIG gloves (both work for MIG welding).

Refund Policy

Up To 7 Days Before the Event Starts.

About the Instructor

Metalworking 101 (Sat, September 12, 2026)

Sat, 12 Sep 2026 15:00:00 GMT

Learn enough metalworking to double your project list!

Curious about how to begin your metalworking journey? Have a project idea that you'd like to use metal in? Join us as we explore how to MIG weld, braze, solder, use hand tools, angle grinders, and cover the shear, drill press, and box and pan brake tools in the shop. Feel more confident using the space safely, add more skills to your tool belt, and walk away with a small completed class project. Participants are encouraged to bring in their own project ideas but not required.

Class One: We'll start with the basics—safety, handy tools to use and how to use them, thinking about fabrication layout, and

Class Two: Our second class will go over how to use the oxy-acetylene torch and plasma cutter. We'll also go over the shear, drill press, and horizontal bandsaw as we begin our class project.

Class Three: We'll learn howuse an angle grinder. We'll use the box and pan brake, small hand tools in the metal shop, and finish our small shop project. We'll also cover some basic finishing techniques.

Class Four: Class four is an open work class. Participants can come and work on their individual project with support from the instructor.

Experience Level

Suited to beginners but all levels welcome.

Skills You'll Learn

MIG Welding, Oxy-Acetylene, plasma cutting, angle grinder, shear, drill press, bandsaw.

Refund Policy

Up To 7 Days Before the Event Starts.

About the Instructor

Cory Due is a local 539 pipefitter who focuses on service work and HVAC. They have both a welding degree and HVAC degree and largely work on commercial systems. They enjoy teaching and making welding less intimidating. When they aren't teaching they're scheming about house projects, tending to their garden, or spending time with their family and menagerie of animals.

Twin Cities Maker Fest 2026 (Sat, September 12, 2026)

Sat, 12 Sep 2026 16:00:00 GMT

Join us for our third annual Twin Cities Maker Fest!

Twin Cities Maker Fest 2026 will be a street fair on the corner of 31st Ave S and E 26th St with activities, large demos, food trucks, and 150 local artists and craftspeople. Spend the day exploring Minneapolis’ biggest block party of small makers and seasoned artists alike! Free admission, and open to all ages.

For more info, check out the Twin Cities Maker Fest tab on our website.

Metalworking 101 (Sun, September 13, 2026)

Sun, 13 Sep 2026 15:00:00 GMT

Learn enough metalworking to double your project list!

Class One: We'll start with the basics—safety, handy tools to use and how to use them, thinking about fabrication layout, and

Class Two: Our second class will go over how to use the oxy-acetylene torch and plasma cutter. We'll also go over the shear, drill press, and horizontal bandsaw as we begin our class project.

Class Four: Class four is an open work class. Participants can come and work on their individual project with support from the instructor.

Experience Level

Suited to beginners but all levels welcome.

Skills You'll Learn

MIG Welding, Oxy-Acetylene, plasma cutting, angle grinder, shear, drill press, bandsaw.

Refund Policy

Up To 7 Days Before the Event Starts.

About the Instructor

Metal Shop Orientation (Mon, September 14, 2026)

Mon, 14 Sep 2026 23:00:00 GMT

Please be on time and let me know if you cannot attend. Thank you

Garden Ed: Sustainability in the Garden (Mon, September 14, 2026)

Tue, 15 Sep 2026 00:00:00 GMT

Join us for a series of free Gardening Education presentations, led by Hennepin County Master Gardeners, right here at Twin Cities Maker!

This workshop’s topic is Sustainability in the Garden:

This class will provide a quick overview of the concept of a sustainable landscape and showcase the basics steps to build a healthy yard and garden. The basics start with the trifecta of soil, sun and water in your current landscape followed by selecting plants to be long-lived and well-suited to your site. Making smart choices will provide you with a lawn and gardens to be enjoyed for many years as well as provide habitats for pollinators and other wildlife.

Can’t make this one? Check out our calendar for the next presentations in our Gardening Education series!

Thank you to Hennepin County Master Gardeners.

Open Circuits (Tue, September 15, 2026)

Wed, 16 Sep 2026 00:00:00 GMT

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

You can bring your own project for show-and-tell, to get help, or to just plan on making progress
Contribute to community projects (see list below)
Learn how to use the E-lab equipment
Connect with fellow Twin Cities Makers

Open Circuits is open to both Twin City Maker members and the public at large. We'll meet in the Twin Cities Maker Electronics Lab and spill out into the lobby as necessary.

Community Projects

(on the docket for the foreseeable future)

Raspberry-Pi-based parking permit printer for member storage
Fob-based vending machine for tools and supplies
Fob-based access control to heavy machinery
Vacuum sensors
Energy monitoring (single-phase and 3-phase)
Temperature controller for glasswork

Side Projects

Humidity sensors (e.g., for 3D filament dry boxes)
Strain gauges for weighing propane tanks
ESP32 and ESP8266 projects using Wi-Fi and MQTT

Learn new skills

Wire crimping
Oscilloscope usage
Microcontroller programming
Reverse engineering
3D modeling enclosures

It is not necessary to RSVP to this event!

Festool Domino Joiner - Basic Training (Wed, September 16, 2026)

Wed, 16 Sep 2026 23:30:00 GMT

FESTOOL DOMINO TRAINING

This class provides basic training and familiarity with the Festool Domino for you to be signed off and granted access.

At the end of this class members will be given access to both Festool Dominos which are secured in a locked storage cabinet.

Twin Cities Maker Open House (Wed, September 16, 2026)

Thu, 17 Sep 2026 00:00:00 GMT

Twin Cities Maker (TC Maker) is a non-profit, all volunteer run, community maker space based in the Minneapolis/St. Paul area.

Our mission is to make, share, and learn.

Learn more about us at our website! https://www.tcmaker.org/

This event is a tour only. Non-members are not permitted to operate any tools or equipment. Appropriate safety precautions MUST be taken before entering the shop.

Fiber Fun Night (Wed, September 16, 2026)

Thu, 17 Sep 2026 00:00:00 GMT

Fiber Night on Wednesday in the lobby for anyone who wants to join! We'll be working on beginning knitting and crochet but are open to any other suggestions

Email artifactory@tcmaker.org with questions!

New Member Orientation (Thu, September 17, 2026)

Thu, 17 Sep 2026 23:00:00 GMT

About this event

Orientation lasts for about 1 hour with time after for questions and support for any issues.

After you have completed orientation you will receive your fob to access the facility, which will be activated once have paid all membership fees.

If you are going to be working in the woodshop be sure to sign up for woodshop orientation immediately following this class. Check our orientations calendar to register.

All New Members are required to Pre-Register for this Orientation.

If you cannot attend an in person orientation, please reach out to membership@tcmaker.org so that we can work out special arrangements.

Wood Shop Orientation (Thu, September 17, 2026)

Fri, 18 Sep 2026 00:00:00 GMT

Wood Shop Orientation

Wood Shop Orientation is a required orientation for all woodworkers.

During Orientation we will cover basic shop safety guidelines along with best practices that are necessary to use the wood shop at Twin Cities Maker!

https://wiki.tcmaker.org/en/shop_departments/wood_shop

Metalworking 101 (Sat, September 19, 2026)

Sat, 19 Sep 2026 15:00:00 GMT

Learn enough metalworking to double your project list!

Class One: We'll start with the basics—safety, handy tools to use and how to use them, thinking about fabrication layout, and

Class Two: Our second class will go over how to use the oxy-acetylene torch and plasma cutter. We'll also go over the shear, drill press, and horizontal bandsaw as we begin our class project.

Class Four: Class four is an open work class. Participants can come and work on their individual project with support from the instructor.

Experience Level

Suited to beginners but all levels welcome.

Skills You'll Learn

MIG Welding, Oxy-Acetylene, plasma cutting, angle grinder, shear, drill press, bandsaw.

Refund Policy

Up To 7 Days Before the Event Starts.

About the Instructor

Metalworking 101 (Sun, September 20, 2026)

Sun, 20 Sep 2026 15:00:00 GMT

Learn enough metalworking to double your project list!

Class One: We'll start with the basics—safety, handy tools to use and how to use them, thinking about fabrication layout, and

Class Two: Our second class will go over how to use the oxy-acetylene torch and plasma cutter. We'll also go over the shear, drill press, and horizontal bandsaw as we begin our class project.

Class Four: Class four is an open work class. Participants can come and work on their individual project with support from the instructor.

Experience Level

Suited to beginners but all levels welcome.

Skills You'll Learn

MIG Welding, Oxy-Acetylene, plasma cutting, angle grinder, shear, drill press, bandsaw.

Refund Policy

Up To 7 Days Before the Event Starts.

About the Instructor

Open Circuits (Tue, September 22, 2026)

Wed, 23 Sep 2026 00:00:00 GMT

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

You can bring your own project for show-and-tell, to get help, or to just plan on making progress
Contribute to community projects (see list below)
Learn how to use the E-lab equipment
Connect with fellow Twin Cities Makers

Open Circuits is open to both Twin City Maker members and the public at large. We'll meet in the Twin Cities Maker Electronics Lab and spill out into the lobby as necessary.

Community Projects

(on the docket for the foreseeable future)

Raspberry-Pi-based parking permit printer for member storage
Fob-based vending machine for tools and supplies
Fob-based access control to heavy machinery
Vacuum sensors
Energy monitoring (single-phase and 3-phase)
Temperature controller for glasswork

Side Projects

Humidity sensors (e.g., for 3D filament dry boxes)
Strain gauges for weighing propane tanks
ESP32 and ESP8266 projects using Wi-Fi and MQTT

Learn new skills

Wire crimping
Oscilloscope usage
Microcontroller programming
Reverse engineering
3D modeling enclosures

It is not necessary to RSVP to this event!

Wood Shop Maintenance Night (Wed, September 23, 2026)

Wed, 23 Sep 2026 23:00:00 GMT

WOOD SHOP MAINTENANCE NIGHT

Join Us for Our Bi-Monthly Wood Shop Maintenance Nights

This time is set aside to perform tasks around making sure our tools stay in peak performance and trying to ensure that the tools stay in good working order during the month. Never repaired a tool or performed maintenance before – not a problem!! There are maintenance task for all levels of expertise – and we’ll always have at least one person around that can help you learn!

Twin Cities Maker Open House (Wed, September 23, 2026)

Thu, 24 Sep 2026 00:00:00 GMT

Twin Cities Maker (TC Maker) is a non-profit, all volunteer run, community maker space based in the Minneapolis/St. Paul area.

Our mission is to make, share, and learn.

Learn more about us at our website! https://www.tcmaker.org/

This event is a tour only. Non-members are not permitted to operate any tools or equipment. Appropriate safety precautions MUST be taken before entering the shop.

Fiber Fun Night (Wed, September 23, 2026)

Thu, 24 Sep 2026 00:00:00 GMT

Fiber Night on Wednesday in the lobby for anyone who wants to join! We'll be working on beginning knitting and crochet but are open to any other suggestions

Email artifactory@tcmaker.org with questions!

Garden Ed: Extending the Growing Season (Sat, September 26, 2026)

Sat, 26 Sep 2026 15:00:00 GMT

Join us for a series of free Gardening Education presentations, led by Hennepin County Master Gardeners, right here at Twin Cities Maker!

This workshop’s topic is Sustainability in the Garden:

Frustrated by the short Minnesota growing season? There are several methods you can implement to add weeks to your growing calendar. We’ll discuss techniques that range from simple to advanced and empower you to try one or multiple in the upcoming season to get the most out of your garden. This class covers soil warming methods, crop covers, basic succession planting, and protective structures.

Thank you to Hennepin County Master Gardeners.

Open Circuits (Tue, September 29, 2026)

Wed, 30 Sep 2026 00:00:00 GMT

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

You can bring your own project for show-and-tell, to get help, or to just plan on making progress
Contribute to community projects (see list below)
Learn how to use the E-lab equipment
Connect with fellow Twin Cities Makers

Open Circuits is open to both Twin City Maker members and the public at large. We'll meet in the Twin Cities Maker Electronics Lab and spill out into the lobby as necessary.

Community Projects

(on the docket for the foreseeable future)

Raspberry-Pi-based parking permit printer for member storage
Fob-based vending machine for tools and supplies
Fob-based access control to heavy machinery
Vacuum sensors
Energy monitoring (single-phase and 3-phase)
Temperature controller for glasswork

Side Projects

Humidity sensors (e.g., for 3D filament dry boxes)
Strain gauges for weighing propane tanks
ESP32 and ESP8266 projects using Wi-Fi and MQTT

Learn new skills

Wire crimping
Oscilloscope usage
Microcontroller programming
Reverse engineering
3D modeling enclosures

It is not necessary to RSVP to this event!

Twin Cities Maker Open House (Wed, September 30, 2026)

Thu, 01 Oct 2026 00:00:00 GMT

Twin Cities Maker (TC Maker) is a non-profit, all volunteer run, community maker space based in the Minneapolis/St. Paul area.

Our mission is to make, share, and learn.

Learn more about us at our website! https://www.tcmaker.org/

This event is a tour only. Non-members are not permitted to operate any tools or equipment. Appropriate safety precautions MUST be taken before entering the shop.

Fiber Fun Night (Wed, September 30, 2026)

Thu, 01 Oct 2026 00:00:00 GMT

Fiber Night on Wednesday in the lobby for anyone who wants to join! We'll be working on beginning knitting and crochet but are open to any other suggestions

Email artifactory@tcmaker.org with questions!

New Member Orientation (Thu, October 01, 2026)

Thu, 01 Oct 2026 23:00:00 GMT

About this event

Orientation lasts for about 1 hour with time after for questions and support for any issues.

After you have completed orientation you will receive your fob to access the facility, which will be activated once have paid all membership fees.

If you are going to be working in the woodshop be sure to sign up for woodshop orientation immediately following this class. Check our orientations calendar to register.

All New Members are required to Pre-Register for this Orientation.

If you cannot attend an in person orientation, please reach out to membership@tcmaker.org so that we can work out special arrangements.

Wood Shop Orientation (Thu, October 01, 2026)

Fri, 02 Oct 2026 00:00:00 GMT

Wood Shop Orientation

Wood Shop Orientation is a required orientation for all woodworkers.

During Orientation we will cover basic shop safety guidelines along with best practices that are necessary to use the wood shop at Twin Cities Maker!

https://wiki.tcmaker.org/en/shop_departments/wood_shop

Wood Shop Maintenance Night (Mon, October 05, 2026)

Mon, 05 Oct 2026 23:00:00 GMT

WOOD SHOP MAINTENANCE NIGHT

Join Us for Our Bi-Monthly Wood Shop Maintenance Nights

This time is set aside to perform tasks around making sure our tools stay in peak performance and trying to ensure that the tools stay in good working order during the month. Never repaired a tool or performed maintenance before – not a problem!! There are maintenance task for all levels of expertise – and we’ll always have at least one person around that can help you learn!

Jewelry Orientation (Mon, October 05, 2026)

Tue, 06 Oct 2026 00:00:00 GMT

General Know-How

Safety guidance, risks and risk mitigation
Shop rules and expectations
The mounted tools (bench pin, flex shaft, drill press, bench buffer, scroll saw)
The furnaces & kilns

Fabrication

Measuring and Marking

Calipers, rulers, dividers, scribe, center punch, stencils

Forming

Rolling mill, steel/rubber blocks, hammers & mallets, mandrels, swage blocks, wire wrapping

Cutting and Reducing

Files, sandpaper, jeweler's saw (and how to replace its blades), shears, hand cutters, rotary tool bits

Joining

Solder and when to use each type, solder picks, torch, flux, fume extraction, pickle

Polishing

Rotary tool options for detail polishing
Bench buffer for mass polishing

Various Jigs and Miscellaneous

Miter jig, wax ring blank cutting
Scrap metal rules

Casting

Wax carving and mold creation
Red sand / delft clay casting
Investment casting — This will be a general overview of the tools. The process is VERY involved; keep an eye on WA for a full class in the future!

Conclusion

We will end by discussing what's next for the jewelry department, how to get involved, and where to find resources for learning more.

Happy making!
~Abby

Open Circuits (Tue, October 06, 2026)

Wed, 07 Oct 2026 00:00:00 GMT

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

You can bring your own project for show-and-tell, to get help, or to just plan on making progress
Contribute to community projects (see list below)
Learn how to use the E-lab equipment
Connect with fellow Twin Cities Makers

Open Circuits is open to both Twin City Maker members and the public at large. We'll meet in the Twin Cities Maker Electronics Lab and spill out into the lobby as necessary.

Community Projects

(on the docket for the foreseeable future)

Raspberry-Pi-based parking permit printer for member storage
Fob-based vending machine for tools and supplies
Fob-based access control to heavy machinery
Vacuum sensors
Energy monitoring (single-phase and 3-phase)
Temperature controller for glasswork

Side Projects

Humidity sensors (e.g., for 3D filament dry boxes)
Strain gauges for weighing propane tanks
ESP32 and ESP8266 projects using Wi-Fi and MQTT

Learn new skills

Wire crimping
Oscilloscope usage
Microcontroller programming
Reverse engineering
3D modeling enclosures

It is not necessary to RSVP to this event!

Twin Cities Maker Open House (Wed, October 07, 2026)

Thu, 08 Oct 2026 00:00:00 GMT

Twin Cities Maker (TC Maker) is a non-profit, all volunteer run, community maker space based in the Minneapolis/St. Paul area.

Our mission is to make, share, and learn.

Learn more about us at our website! https://www.tcmaker.org/

This event is a tour only. Non-members are not permitted to operate any tools or equipment. Appropriate safety precautions MUST be taken before entering the shop.

Metal Shop Orientation (Mon, October 12, 2026)

Mon, 12 Oct 2026 23:00:00 GMT

Please be on time and let me know if you cannot attend. Thank you

Twin Cities Maker Quarterly Town Hall (Tue, October 13, 2026)

Tue, 13 Oct 2026 23:00:00 GMT

We encourage all members to attend our Town Hall meetings!

All Town Hall meeting are held in person in the Artifactory as well as virtually online. To join the meeting online please visit https://go.tcmaker.org/boardmeeting

Open Circuits (Tue, October 13, 2026)

Wed, 14 Oct 2026 00:00:00 GMT

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

You can bring your own project for show-and-tell, to get help, or to just plan on making progress
Contribute to community projects (see list below)
Learn how to use the E-lab equipment
Connect with fellow Twin Cities Makers

Open Circuits is open to both Twin City Maker members and the public at large. We'll meet in the Twin Cities Maker Electronics Lab and spill out into the lobby as necessary.

Community Projects

(on the docket for the foreseeable future)

Raspberry-Pi-based parking permit printer for member storage
Fob-based vending machine for tools and supplies
Fob-based access control to heavy machinery
Vacuum sensors
Energy monitoring (single-phase and 3-phase)
Temperature controller for glasswork

Side Projects

Humidity sensors (e.g., for 3D filament dry boxes)
Strain gauges for weighing propane tanks
ESP32 and ESP8266 projects using Wi-Fi and MQTT

Learn new skills

Wire crimping
Oscilloscope usage
Microcontroller programming
Reverse engineering
3D modeling enclosures

It is not necessary to RSVP to this event!

Twin Cities Maker Open House (Wed, October 14, 2026)

Thu, 15 Oct 2026 00:00:00 GMT

Twin Cities Maker (TC Maker) is a non-profit, all volunteer run, community maker space based in the Minneapolis/St. Paul area.

Our mission is to make, share, and learn.

Learn more about us at our website! https://www.tcmaker.org/

This event is a tour only. Non-members are not permitted to operate any tools or equipment. Appropriate safety precautions MUST be taken before entering the shop.

New Member Orientation (Thu, October 15, 2026)

Thu, 15 Oct 2026 23:00:00 GMT

About this event

Orientation lasts for about 1 hour with time after for questions and support for any issues.

After you have completed orientation you will receive your fob to access the facility, which will be activated once have paid all membership fees.

If you are going to be working in the woodshop be sure to sign up for woodshop orientation immediately following this class. Check our orientations calendar to register.

All New Members are required to Pre-Register for this Orientation.

If you cannot attend an in person orientation, please reach out to membership@tcmaker.org so that we can work out special arrangements.

Wood Shop Orientation (Thu, October 15, 2026)

Fri, 16 Oct 2026 00:00:00 GMT

Wood Shop Orientation

Wood Shop Orientation is a required orientation for all woodworkers.

During Orientation we will cover basic shop safety guidelines along with best practices that are necessary to use the wood shop at Twin Cities Maker!

https://wiki.tcmaker.org/en/shop_departments/wood_shop

WATERCOLOR LANDSCAPES, A 5-Week Painting Series (Mon, October 19, 2026)

Mon, 19 Oct 2026 23:30:00 GMT

Discover the beauty of watercolor through landscape painting in this 5-week series designed for beginners and developing artists alike.

Watercolor is beautifully suited to capturing the natural world. Its fluidity and versatility can give us soft skies, layered depth, and expressive textures that bring landscapes to life on paper.

In this course, you'll learn how to work with water and pigment from the ground up. We will begin with foundational techniques and build upon your culminating skills toward a finished landscape painting of your own. Along the way, you'll explore how to create natural shapes, color, atmosphere and depth—using a balance of control and spontaneity.

Each session combines guided instruction, hands-on practice, and time to develop your own work, giving you both the skills and confidence to continue painting beyond the course.

Whether you're brand new to watercolor or returning after time away, this class offers a supportive, focused environment where you can slow down, build technique, and enjoy the creative process.

What You'll Experience

Clear, step-by-step introduction to watercolor techniques
Guided practice applying those techniques to natural subjects
Individual and group feedback to support your growth
A relaxed, engaging studio atmosphere
The satisfaction of creating your own landscape painting

What You'll Learn

Over five sessions, you will:

Build confidence with washes, water control, and color mixing
Explore key techniques like wet-on-wet, wet-on-dry, dry brush, lifting, and masking
Learn how to paint trees, skies, water, and atmospheric effects
Understand composition and depth in landscape painting
Create and refine a finished landscape painting

Open Circuits (Tue, October 20, 2026)

Wed, 21 Oct 2026 00:00:00 GMT

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

You can bring your own project for show-and-tell, to get help, or to just plan on making progress
Contribute to community projects (see list below)
Learn how to use the E-lab equipment
Connect with fellow Twin Cities Makers

Open Circuits is open to both Twin City Maker members and the public at large. We'll meet in the Twin Cities Maker Electronics Lab and spill out into the lobby as necessary.

Community Projects

(on the docket for the foreseeable future)

Raspberry-Pi-based parking permit printer for member storage
Fob-based vending machine for tools and supplies
Fob-based access control to heavy machinery
Vacuum sensors
Energy monitoring (single-phase and 3-phase)
Temperature controller for glasswork

Side Projects

Humidity sensors (e.g., for 3D filament dry boxes)
Strain gauges for weighing propane tanks
ESP32 and ESP8266 projects using Wi-Fi and MQTT

Learn new skills

Wire crimping
Oscilloscope usage
Microcontroller programming
Reverse engineering
3D modeling enclosures

It is not necessary to RSVP to this event!

Wood Shop Maintenance Night (Wed, October 21, 2026)

Wed, 21 Oct 2026 23:00:00 GMT

WOOD SHOP MAINTENANCE NIGHT

Join Us for Our Bi-Monthly Wood Shop Maintenance Nights

This time is set aside to perform tasks around making sure our tools stay in peak performance and trying to ensure that the tools stay in good working order during the month. Never repaired a tool or performed maintenance before – not a problem!! There are maintenance task for all levels of expertise – and we’ll always have at least one person around that can help you learn!

Festool Domino Joiner - Basic Training (Wed, October 21, 2026)

Wed, 21 Oct 2026 23:30:00 GMT

FESTOOL DOMINO TRAINING

This class provides basic training and familiarity with the Festool Domino for you to be signed off and granted access.

At the end of this class members will be given access to both Festool Dominos which are secured in a locked storage cabinet.

Twin Cities Maker Open House (Wed, October 21, 2026)

Thu, 22 Oct 2026 00:00:00 GMT

Twin Cities Maker (TC Maker) is a non-profit, all volunteer run, community maker space based in the Minneapolis/St. Paul area.

Our mission is to make, share, and learn.

Learn more about us at our website! https://www.tcmaker.org/

This event is a tour only. Non-members are not permitted to operate any tools or equipment. Appropriate safety precautions MUST be taken before entering the shop.

WATERCOLOR LANDSCAPES, A 5-Week Painting Series (Mon, October 26, 2026)

Mon, 26 Oct 2026 23:30:00 GMT

Discover the beauty of watercolor through landscape painting in this 5-week series designed for beginners and developing artists alike.

Watercolor is beautifully suited to capturing the natural world. Its fluidity and versatility can give us soft skies, layered depth, and expressive textures that bring landscapes to life on paper.

Each session combines guided instruction, hands-on practice, and time to develop your own work, giving you both the skills and confidence to continue painting beyond the course.

Whether you're brand new to watercolor or returning after time away, this class offers a supportive, focused environment where you can slow down, build technique, and enjoy the creative process.

What You'll Experience

Clear, step-by-step introduction to watercolor techniques
Guided practice applying those techniques to natural subjects
Individual and group feedback to support your growth
A relaxed, engaging studio atmosphere
The satisfaction of creating your own landscape painting

What You'll Learn

Over five sessions, you will:

Build confidence with washes, water control, and color mixing
Explore key techniques like wet-on-wet, wet-on-dry, dry brush, lifting, and masking
Learn how to paint trees, skies, water, and atmospheric effects
Understand composition and depth in landscape painting
Create and refine a finished landscape painting

Open Circuits (Tue, October 27, 2026)

Wed, 28 Oct 2026 00:00:00 GMT

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

You can bring your own project for show-and-tell, to get help, or to just plan on making progress
Contribute to community projects (see list below)
Learn how to use the E-lab equipment
Connect with fellow Twin Cities Makers

Open Circuits is open to both Twin City Maker members and the public at large. We'll meet in the Twin Cities Maker Electronics Lab and spill out into the lobby as necessary.

Community Projects

(on the docket for the foreseeable future)

Raspberry-Pi-based parking permit printer for member storage
Fob-based vending machine for tools and supplies
Fob-based access control to heavy machinery
Vacuum sensors
Energy monitoring (single-phase and 3-phase)
Temperature controller for glasswork

Side Projects

Humidity sensors (e.g., for 3D filament dry boxes)
Strain gauges for weighing propane tanks
ESP32 and ESP8266 projects using Wi-Fi and MQTT

Learn new skills

Wire crimping
Oscilloscope usage
Microcontroller programming
Reverse engineering
3D modeling enclosures

It is not necessary to RSVP to this event!

Twin Cities Maker Open House (Wed, October 28, 2026)

Thu, 29 Oct 2026 00:00:00 GMT

Twin Cities Maker (TC Maker) is a non-profit, all volunteer run, community maker space based in the Minneapolis/St. Paul area.

Our mission is to make, share, and learn.

Learn more about us at our website! https://www.tcmaker.org/

This event is a tour only. Non-members are not permitted to operate any tools or equipment. Appropriate safety precautions MUST be taken before entering the shop.

New Member Orientation (Thu, October 29, 2026)

Thu, 29 Oct 2026 23:00:00 GMT

About this event

Orientation lasts for about 1 hour with time after for questions and support for any issues.

After you have completed orientation you will receive your fob to access the facility, which will be activated once have paid all membership fees.

If you are going to be working in the woodshop be sure to sign up for woodshop orientation immediately following this class. Check our orientations calendar to register.

All New Members are required to Pre-Register for this Orientation.

If you cannot attend an in person orientation, please reach out to membership@tcmaker.org so that we can work out special arrangements.

Wood Shop Orientation (Thu, October 29, 2026)

Fri, 30 Oct 2026 00:00:00 GMT

Wood Shop Orientation

Wood Shop Orientation is a required orientation for all woodworkers.

During Orientation we will cover basic shop safety guidelines along with best practices that are necessary to use the wood shop at Twin Cities Maker!

https://wiki.tcmaker.org/en/shop_departments/wood_shop

Wood Shop Maintenance Night (Mon, November 02, 2026)

Tue, 03 Nov 2026 00:00:00 GMT

WOOD SHOP MAINTENANCE NIGHT

Join Us for Our Bi-Monthly Wood Shop Maintenance Nights

This time is set aside to perform tasks around making sure our tools stay in peak performance and trying to ensure that the tools stay in good working order during the month. Never repaired a tool or performed maintenance before – not a problem!! There are maintenance task for all levels of expertise – and we’ll always have at least one person around that can help you learn!

WATERCOLOR LANDSCAPES, A 5-Week Painting Series (Mon, November 02, 2026)

Tue, 03 Nov 2026 00:30:00 GMT

Discover the beauty of watercolor through landscape painting in this 5-week series designed for beginners and developing artists alike.

Watercolor is beautifully suited to capturing the natural world. Its fluidity and versatility can give us soft skies, layered depth, and expressive textures that bring landscapes to life on paper.

Each session combines guided instruction, hands-on practice, and time to develop your own work, giving you both the skills and confidence to continue painting beyond the course.

Whether you're brand new to watercolor or returning after time away, this class offers a supportive, focused environment where you can slow down, build technique, and enjoy the creative process.

What You'll Experience

Clear, step-by-step introduction to watercolor techniques
Guided practice applying those techniques to natural subjects
Individual and group feedback to support your growth
A relaxed, engaging studio atmosphere
The satisfaction of creating your own landscape painting

What You'll Learn

Over five sessions, you will:

Build confidence with washes, water control, and color mixing
Explore key techniques like wet-on-wet, wet-on-dry, dry brush, lifting, and masking
Learn how to paint trees, skies, water, and atmospheric effects
Understand composition and depth in landscape painting
Create and refine a finished landscape painting

Open Circuits (Tue, November 03, 2026)

Wed, 04 Nov 2026 01:00:00 GMT

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

You can bring your own project for show-and-tell, to get help, or to just plan on making progress
Contribute to community projects (see list below)
Learn how to use the E-lab equipment
Connect with fellow Twin Cities Makers

Open Circuits is open to both Twin City Maker members and the public at large. We'll meet in the Twin Cities Maker Electronics Lab and spill out into the lobby as necessary.

Community Projects

(on the docket for the foreseeable future)

Raspberry-Pi-based parking permit printer for member storage
Fob-based vending machine for tools and supplies
Fob-based access control to heavy machinery
Vacuum sensors
Energy monitoring (single-phase and 3-phase)
Temperature controller for glasswork

Side Projects

Humidity sensors (e.g., for 3D filament dry boxes)
Strain gauges for weighing propane tanks
ESP32 and ESP8266 projects using Wi-Fi and MQTT

Learn new skills

Wire crimping
Oscilloscope usage
Microcontroller programming
Reverse engineering
3D modeling enclosures

It is not necessary to RSVP to this event!

Twin Cities Maker Open House (Wed, November 04, 2026)

Thu, 05 Nov 2026 01:00:00 GMT

Twin Cities Maker (TC Maker) is a non-profit, all volunteer run, community maker space based in the Minneapolis/St. Paul area.

Our mission is to make, share, and learn.

Learn more about us at our website! https://www.tcmaker.org/

This event is a tour only. Non-members are not permitted to operate any tools or equipment. Appropriate safety precautions MUST be taken before entering the shop.

Quarterly Cleanup (Sat, November 07, 2026)

Sat, 07 Nov 2026 14:00:00 GMT

Metal Shop Orientation (Mon, November 09, 2026)

Tue, 10 Nov 2026 00:00:00 GMT

Please be on time and let me know if you cannot attend. Thank you

WATERCOLOR LANDSCAPES, A 5-Week Painting Series (Mon, November 09, 2026)

Tue, 10 Nov 2026 00:30:00 GMT

Discover the beauty of watercolor through landscape painting in this 5-week series designed for beginners and developing artists alike.

Watercolor is beautifully suited to capturing the natural world. Its fluidity and versatility can give us soft skies, layered depth, and expressive textures that bring landscapes to life on paper.

Each session combines guided instruction, hands-on practice, and time to develop your own work, giving you both the skills and confidence to continue painting beyond the course.

Whether you're brand new to watercolor or returning after time away, this class offers a supportive, focused environment where you can slow down, build technique, and enjoy the creative process.

What You'll Experience

Clear, step-by-step introduction to watercolor techniques
Guided practice applying those techniques to natural subjects
Individual and group feedback to support your growth
A relaxed, engaging studio atmosphere
The satisfaction of creating your own landscape painting

What You'll Learn

Over five sessions, you will:

Build confidence with washes, water control, and color mixing
Explore key techniques like wet-on-wet, wet-on-dry, dry brush, lifting, and masking
Learn how to paint trees, skies, water, and atmospheric effects
Understand composition and depth in landscape painting
Create and refine a finished landscape painting

Twin Cities Maker Quarterly Finance Committee Meeting (Tue, November 10, 2026)

Wed, 11 Nov 2026 00:00:00 GMT

We encourage all members to attend our Finance Committee meetings!

All Finance Committee meeting are held in person in the Artifactory as well as virtually online. To join the meeting online please visit https://go.tcmaker.org/boardmeeting

Open Circuits (Tue, November 10, 2026)

Wed, 11 Nov 2026 01:00:00 GMT

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

You can bring your own project for show-and-tell, to get help, or to just plan on making progress
Contribute to community projects (see list below)
Learn how to use the E-lab equipment
Connect with fellow Twin Cities Makers

Open Circuits is open to both Twin City Maker members and the public at large. We'll meet in the Twin Cities Maker Electronics Lab and spill out into the lobby as necessary.

Community Projects

(on the docket for the foreseeable future)

Raspberry-Pi-based parking permit printer for member storage
Fob-based vending machine for tools and supplies
Fob-based access control to heavy machinery
Vacuum sensors
Energy monitoring (single-phase and 3-phase)
Temperature controller for glasswork

Side Projects

Humidity sensors (e.g., for 3D filament dry boxes)
Strain gauges for weighing propane tanks
ESP32 and ESP8266 projects using Wi-Fi and MQTT

Learn new skills

Wire crimping
Oscilloscope usage
Microcontroller programming
Reverse engineering
3D modeling enclosures

It is not necessary to RSVP to this event!

Twin Cities Maker Open House (Wed, November 11, 2026)

Thu, 12 Nov 2026 01:00:00 GMT

Twin Cities Maker (TC Maker) is a non-profit, all volunteer run, community maker space based in the Minneapolis/St. Paul area.

Our mission is to make, share, and learn.

Learn more about us at our website! https://www.tcmaker.org/

This event is a tour only. Non-members are not permitted to operate any tools or equipment. Appropriate safety precautions MUST be taken before entering the shop.

New Member Orientation (Thu, November 12, 2026)

Fri, 13 Nov 2026 00:00:00 GMT

About this event

Orientation lasts for about 1 hour with time after for questions and support for any issues.

After you have completed orientation you will receive your fob to access the facility, which will be activated once have paid all membership fees.

If you are going to be working in the woodshop be sure to sign up for woodshop orientation immediately following this class. Check our orientations calendar to register.

All New Members are required to Pre-Register for this Orientation.

If you cannot attend an in person orientation, please reach out to membership@tcmaker.org so that we can work out special arrangements.

Wood Shop Orientation (Thu, November 12, 2026)

Fri, 13 Nov 2026 01:00:00 GMT

Wood Shop Orientation

Wood Shop Orientation is a required orientation for all woodworkers.

During Orientation we will cover basic shop safety guidelines along with best practices that are necessary to use the wood shop at Twin Cities Maker!

https://wiki.tcmaker.org/en/shop_departments/wood_shop

WATERCOLOR LANDSCAPES, A 5-Week Painting Series (Mon, November 16, 2026)

Tue, 17 Nov 2026 00:30:00 GMT

Discover the beauty of watercolor through landscape painting in this 5-week series designed for beginners and developing artists alike.

Watercolor is beautifully suited to capturing the natural world. Its fluidity and versatility can give us soft skies, layered depth, and expressive textures that bring landscapes to life on paper.

Each session combines guided instruction, hands-on practice, and time to develop your own work, giving you both the skills and confidence to continue painting beyond the course.

Whether you're brand new to watercolor or returning after time away, this class offers a supportive, focused environment where you can slow down, build technique, and enjoy the creative process.

What You'll Experience

Clear, step-by-step introduction to watercolor techniques
Guided practice applying those techniques to natural subjects
Individual and group feedback to support your growth
A relaxed, engaging studio atmosphere
The satisfaction of creating your own landscape painting

What You'll Learn

Over five sessions, you will:

Build confidence with washes, water control, and color mixing
Explore key techniques like wet-on-wet, wet-on-dry, dry brush, lifting, and masking
Learn how to paint trees, skies, water, and atmospheric effects
Understand composition and depth in landscape painting
Create and refine a finished landscape painting

Open Circuits (Tue, November 17, 2026)

Wed, 18 Nov 2026 01:00:00 GMT

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

You can bring your own project for show-and-tell, to get help, or to just plan on making progress
Contribute to community projects (see list below)
Learn how to use the E-lab equipment
Connect with fellow Twin Cities Makers

Open Circuits is open to both Twin City Maker members and the public at large. We'll meet in the Twin Cities Maker Electronics Lab and spill out into the lobby as necessary.

Community Projects

(on the docket for the foreseeable future)

Raspberry-Pi-based parking permit printer for member storage
Fob-based vending machine for tools and supplies
Fob-based access control to heavy machinery
Vacuum sensors
Energy monitoring (single-phase and 3-phase)
Temperature controller for glasswork

Side Projects

Humidity sensors (e.g., for 3D filament dry boxes)
Strain gauges for weighing propane tanks
ESP32 and ESP8266 projects using Wi-Fi and MQTT

Learn new skills

Wire crimping
Oscilloscope usage
Microcontroller programming
Reverse engineering
3D modeling enclosures

It is not necessary to RSVP to this event!

Wood Shop Maintenance Night (Wed, November 18, 2026)

Thu, 19 Nov 2026 00:00:00 GMT

WOOD SHOP MAINTENANCE NIGHT

Join Us for Our Bi-Monthly Wood Shop Maintenance Nights

This time is set aside to perform tasks around making sure our tools stay in peak performance and trying to ensure that the tools stay in good working order during the month. Never repaired a tool or performed maintenance before – not a problem!! There are maintenance task for all levels of expertise – and we’ll always have at least one person around that can help you learn!

Festool Domino Joiner - Basic Training (Wed, November 18, 2026)

Thu, 19 Nov 2026 00:30:00 GMT

FESTOOL DOMINO TRAINING

This class provides basic training and familiarity with the Festool Domino for you to be signed off and granted access.

At the end of this class members will be given access to both Festool Dominos which are secured in a locked storage cabinet.

Twin Cities Maker Open House (Wed, November 18, 2026)

Thu, 19 Nov 2026 01:00:00 GMT

Twin Cities Maker (TC Maker) is a non-profit, all volunteer run, community maker space based in the Minneapolis/St. Paul area.

Our mission is to make, share, and learn.

Learn more about us at our website! https://www.tcmaker.org/

This event is a tour only. Non-members are not permitted to operate any tools or equipment. Appropriate safety precautions MUST be taken before entering the shop.

Open Circuits (Tue, November 24, 2026)

Wed, 25 Nov 2026 01:00:00 GMT

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

You can bring your own project for show-and-tell, to get help, or to just plan on making progress
Contribute to community projects (see list below)
Learn how to use the E-lab equipment
Connect with fellow Twin Cities Makers

Open Circuits is open to both Twin City Maker members and the public at large. We'll meet in the Twin Cities Maker Electronics Lab and spill out into the lobby as necessary.

Community Projects

(on the docket for the foreseeable future)

Raspberry-Pi-based parking permit printer for member storage
Fob-based vending machine for tools and supplies
Fob-based access control to heavy machinery
Vacuum sensors
Energy monitoring (single-phase and 3-phase)
Temperature controller for glasswork

Side Projects

Humidity sensors (e.g., for 3D filament dry boxes)
Strain gauges for weighing propane tanks
ESP32 and ESP8266 projects using Wi-Fi and MQTT

Learn new skills

Wire crimping
Oscilloscope usage
Microcontroller programming
Reverse engineering
3D modeling enclosures

It is not necessary to RSVP to this event!

Twin Cities Maker Open House (Wed, November 25, 2026)

Thu, 26 Nov 2026 01:00:00 GMT

Twin Cities Maker (TC Maker) is a non-profit, all volunteer run, community maker space based in the Minneapolis/St. Paul area.

Our mission is to make, share, and learn.

Learn more about us at our website! https://www.tcmaker.org/

This event is a tour only. Non-members are not permitted to operate any tools or equipment. Appropriate safety precautions MUST be taken before entering the shop.

Open Circuits (Tue, December 01, 2026)

Wed, 02 Dec 2026 01:00:00 GMT

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

You can bring your own project for show-and-tell, to get help, or to just plan on making progress
Contribute to community projects (see list below)
Learn how to use the E-lab equipment
Connect with fellow Twin Cities Makers

Open Circuits is open to both Twin City Maker members and the public at large. We'll meet in the Twin Cities Maker Electronics Lab and spill out into the lobby as necessary.

Community Projects

(on the docket for the foreseeable future)

Raspberry-Pi-based parking permit printer for member storage
Fob-based vending machine for tools and supplies
Fob-based access control to heavy machinery
Vacuum sensors
Energy monitoring (single-phase and 3-phase)
Temperature controller for glasswork

Side Projects

Humidity sensors (e.g., for 3D filament dry boxes)
Strain gauges for weighing propane tanks
ESP32 and ESP8266 projects using Wi-Fi and MQTT

Learn new skills

Wire crimping
Oscilloscope usage
Microcontroller programming
Reverse engineering
3D modeling enclosures

It is not necessary to RSVP to this event!

Twin Cities Maker Open House (Wed, December 02, 2026)

Thu, 03 Dec 2026 01:00:00 GMT

Twin Cities Maker (TC Maker) is a non-profit, all volunteer run, community maker space based in the Minneapolis/St. Paul area.

Our mission is to make, share, and learn.

Learn more about us at our website! https://www.tcmaker.org/

This event is a tour only. Non-members are not permitted to operate any tools or equipment. Appropriate safety precautions MUST be taken before entering the shop.

New Member Orientation (Thu, December 03, 2026)

Fri, 04 Dec 2026 00:00:00 GMT

About this event

Orientation lasts for about 1 hour with time after for questions and support for any issues.

After you have completed orientation you will receive your fob to access the facility, which will be activated once have paid all membership fees.

If you are going to be working in the woodshop be sure to sign up for woodshop orientation immediately following this class. Check our orientations calendar to register.

All New Members are required to Pre-Register for this Orientation.

If you cannot attend an in person orientation, please reach out to membership@tcmaker.org so that we can work out special arrangements.

Wood Shop Orientation (Thu, December 03, 2026)

Fri, 04 Dec 2026 01:00:00 GMT

Wood Shop Orientation

Wood Shop Orientation is a required orientation for all woodworkers.

During Orientation we will cover basic shop safety guidelines along with best practices that are necessary to use the wood shop at Twin Cities Maker!

https://wiki.tcmaker.org/en/shop_departments/wood_shop

Wood Shop Maintenance Night (Mon, December 07, 2026)

Tue, 08 Dec 2026 00:00:00 GMT

WOOD SHOP MAINTENANCE NIGHT

Join Us for Our Bi-Monthly Wood Shop Maintenance Nights

This time is set aside to perform tasks around making sure our tools stay in peak performance and trying to ensure that the tools stay in good working order during the month. Never repaired a tool or performed maintenance before – not a problem!! There are maintenance task for all levels of expertise – and we’ll always have at least one person around that can help you learn!

Metal Shop Orientation (Mon, December 07, 2026)

Tue, 08 Dec 2026 00:00:00 GMT

Please be on time and let me know if you cannot attend. Thank you

Twin Cities Maker Quarterly Board Meeting (Tue, December 08, 2026)

Wed, 09 Dec 2026 00:00:00 GMT

We encourage all members to attend our board meetings!

All board meeting are held in person in the Artifactory as well as virtually online. To join the meeting online please visit https://go.tcmaker.org/boardmeeting

To view the agenda for this meeting, please visit this link.

To request an item to be added to the agenda, please contact President@TCMaker.org at least 5 days prior to any board meeting.

Open Circuits (Tue, December 08, 2026)

Wed, 09 Dec 2026 01:00:00 GMT

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

You can bring your own project for show-and-tell, to get help, or to just plan on making progress
Contribute to community projects (see list below)
Learn how to use the E-lab equipment
Connect with fellow Twin Cities Makers

Open Circuits is open to both Twin City Maker members and the public at large. We'll meet in the Twin Cities Maker Electronics Lab and spill out into the lobby as necessary.

Community Projects

(on the docket for the foreseeable future)

Raspberry-Pi-based parking permit printer for member storage
Fob-based vending machine for tools and supplies
Fob-based access control to heavy machinery
Vacuum sensors
Energy monitoring (single-phase and 3-phase)
Temperature controller for glasswork

Side Projects

Humidity sensors (e.g., for 3D filament dry boxes)
Strain gauges for weighing propane tanks
ESP32 and ESP8266 projects using Wi-Fi and MQTT

Learn new skills

Wire crimping
Oscilloscope usage
Microcontroller programming
Reverse engineering
3D modeling enclosures

It is not necessary to RSVP to this event!

Twin Cities Maker Open House (Wed, December 09, 2026)

Thu, 10 Dec 2026 01:00:00 GMT

Twin Cities Maker (TC Maker) is a non-profit, all volunteer run, community maker space based in the Minneapolis/St. Paul area.

Our mission is to make, share, and learn.

Learn more about us at our website! https://www.tcmaker.org/

This event is a tour only. Non-members are not permitted to operate any tools or equipment. Appropriate safety precautions MUST be taken before entering the shop.

Open Circuits (Tue, December 15, 2026)

Wed, 16 Dec 2026 01:00:00 GMT

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

You can bring your own project for show-and-tell, to get help, or to just plan on making progress
Contribute to community projects (see list below)
Learn how to use the E-lab equipment
Connect with fellow Twin Cities Makers

Open Circuits is open to both Twin City Maker members and the public at large. We'll meet in the Twin Cities Maker Electronics Lab and spill out into the lobby as necessary.

Community Projects

(on the docket for the foreseeable future)

Raspberry-Pi-based parking permit printer for member storage
Fob-based vending machine for tools and supplies
Fob-based access control to heavy machinery
Vacuum sensors
Energy monitoring (single-phase and 3-phase)
Temperature controller for glasswork

Side Projects

Humidity sensors (e.g., for 3D filament dry boxes)
Strain gauges for weighing propane tanks
ESP32 and ESP8266 projects using Wi-Fi and MQTT

Learn new skills

Wire crimping
Oscilloscope usage
Microcontroller programming
Reverse engineering
3D modeling enclosures

It is not necessary to RSVP to this event!

Festool Domino Joiner - Basic Training (Wed, December 16, 2026)

Thu, 17 Dec 2026 00:30:00 GMT

FESTOOL DOMINO TRAINING

This class provides basic training and familiarity with the Festool Domino for you to be signed off and granted access.

At the end of this class members will be given access to both Festool Dominos which are secured in a locked storage cabinet.

Twin Cities Maker Open House (Wed, December 16, 2026)

Thu, 17 Dec 2026 01:00:00 GMT

Twin Cities Maker (TC Maker) is a non-profit, all volunteer run, community maker space based in the Minneapolis/St. Paul area.

Our mission is to make, share, and learn.

Learn more about us at our website! https://www.tcmaker.org/

This event is a tour only. Non-members are not permitted to operate any tools or equipment. Appropriate safety precautions MUST be taken before entering the shop.

New Member Orientation (Thu, December 17, 2026)

Fri, 18 Dec 2026 00:00:00 GMT

About this event

Orientation lasts for about 1 hour with time after for questions and support for any issues.

After you have completed orientation you will receive your fob to access the facility, which will be activated once have paid all membership fees.

If you are going to be working in the woodshop be sure to sign up for woodshop orientation immediately following this class. Check our orientations calendar to register.

All New Members are required to Pre-Register for this Orientation.

If you cannot attend an in person orientation, please reach out to membership@tcmaker.org so that we can work out special arrangements.

Wood Shop Orientation (Thu, December 17, 2026)

Fri, 18 Dec 2026 01:00:00 GMT

Wood Shop Orientation

Wood Shop Orientation is a required orientation for all woodworkers.

During Orientation we will cover basic shop safety guidelines along with best practices that are necessary to use the wood shop at Twin Cities Maker!

https://wiki.tcmaker.org/en/shop_departments/wood_shop

Open Circuits (Tue, December 22, 2026)

Wed, 23 Dec 2026 01:00:00 GMT

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

You can bring your own project for show-and-tell, to get help, or to just plan on making progress
Contribute to community projects (see list below)
Learn how to use the E-lab equipment
Connect with fellow Twin Cities Makers

Open Circuits is open to both Twin City Maker members and the public at large. We'll meet in the Twin Cities Maker Electronics Lab and spill out into the lobby as necessary.

Community Projects

(on the docket for the foreseeable future)

Raspberry-Pi-based parking permit printer for member storage
Fob-based vending machine for tools and supplies
Fob-based access control to heavy machinery
Vacuum sensors
Energy monitoring (single-phase and 3-phase)
Temperature controller for glasswork

Side Projects

Humidity sensors (e.g., for 3D filament dry boxes)
Strain gauges for weighing propane tanks
ESP32 and ESP8266 projects using Wi-Fi and MQTT

Learn new skills

Wire crimping
Oscilloscope usage
Microcontroller programming
Reverse engineering
3D modeling enclosures

It is not necessary to RSVP to this event!

Wood Shop Maintenance Night (Wed, December 23, 2026)

Thu, 24 Dec 2026 00:00:00 GMT

WOOD SHOP MAINTENANCE NIGHT

Join Us for Our Bi-Monthly Wood Shop Maintenance Nights

This time is set aside to perform tasks around making sure our tools stay in peak performance and trying to ensure that the tools stay in good working order during the month. Never repaired a tool or performed maintenance before – not a problem!! There are maintenance task for all levels of expertise – and we’ll always have at least one person around that can help you learn!

Twin Cities Maker Open House (Wed, December 23, 2026)

Thu, 24 Dec 2026 01:00:00 GMT

Twin Cities Maker (TC Maker) is a non-profit, all volunteer run, community maker space based in the Minneapolis/St. Paul area.

Our mission is to make, share, and learn.

Learn more about us at our website! https://www.tcmaker.org/

This event is a tour only. Non-members are not permitted to operate any tools or equipment. Appropriate safety precautions MUST be taken before entering the shop.

Open Circuits (Tue, December 29, 2026)

Wed, 30 Dec 2026 01:00:00 GMT

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

You can bring your own project for show-and-tell, to get help, or to just plan on making progress
Contribute to community projects (see list below)
Learn how to use the E-lab equipment
Connect with fellow Twin Cities Makers

Open Circuits is open to both Twin City Maker members and the public at large. We'll meet in the Twin Cities Maker Electronics Lab and spill out into the lobby as necessary.

Community Projects

(on the docket for the foreseeable future)

Raspberry-Pi-based parking permit printer for member storage
Fob-based vending machine for tools and supplies
Fob-based access control to heavy machinery
Vacuum sensors
Energy monitoring (single-phase and 3-phase)
Temperature controller for glasswork

Side Projects

Humidity sensors (e.g., for 3D filament dry boxes)
Strain gauges for weighing propane tanks
ESP32 and ESP8266 projects using Wi-Fi and MQTT

Learn new skills

Wire crimping
Oscilloscope usage
Microcontroller programming
Reverse engineering
3D modeling enclosures

It is not necessary to RSVP to this event!

Annual Member Meeting (Sat, February 20, 2027)

Sun, 21 Feb 2027 00:00:00 GMT

Twin Cities Maker upcoming events

Wood Shop Maintenance Night (Mon, July 06, 2026)

WOOD SHOP MAINTENANCE NIGHT

Ceramics | Wheel-Throwing 101 (Mon, July 06, 2026)

Jewelry Orientation (Mon, July 06, 2026)

Jewelry orientation

General Know-How

Fabrication

Casting

Conclusion

Open Circuits (Tue, July 07, 2026)

Open Circuits

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

Community Projects

Side Projects

Learn new skills

Troubleshoot Tuesday (Tue, July 07, 2026)

Twin Cities Maker Open House (Wed, July 08, 2026)

Fiber Fun Night (Wed, July 08, 2026)

New Member Orientation (Thu, July 09, 2026)

About this event

Wood Shop Orientation (Thu, July 09, 2026)

Wood Shop Orientation

Paint Club (Thu, July 09, 2026)

CNC Orientation (Fri, July 10, 2026)

Woodworking 101 (Fri, July 10, 2026)

Tools Covered

What to Bring

*Rescheduled* Metal Shop Maintenance Morning (Sat, July 11, 2026)

Metal Shop Orientation (Mon, July 13, 2026)

Ceramics | Wheel-Throwing 101 (Mon, July 13, 2026)

Twin Cities Maker Quarterly Town Hall (Tue, July 14, 2026)

Open Circuits (Tue, July 14, 2026)

Open Circuits

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

Community Projects

Side Projects

Learn new skills

Wiki & Wine: Upgrade TCM's Wiki (Tue, July 14, 2026)

3D Printing - Intro Class and Orientation (Wed, July 15, 2026)

3D Printing Lab Orientation and Beginner Class

Ceramics | Wheel-Throwing: Beyond the Basics (Wed, July 15, 2026)

Recycled Art Night (Wed, July 15, 2026)

Twin Cities Maker Open House (Wed, July 15, 2026)

Fiber Fun Night (Wed, July 15, 2026)

3D Plastics Repair Clinic (Thu, July 16, 2026)

Wiki & Wine: Upgrade TCM's Wiki (Thu, July 16, 2026)

Paint Club (Thu, July 16, 2026)

Jewelry: Open Studio (Fri, July 17, 2026)

Jewelry Studio Open Hours

This event is for you if:

Woodworking 101 (Fri, July 17, 2026)

Tools Covered

What to Bring

Garden Ed: Edible Landscapes (Sat, July 18, 2026)

Ceramics | Wheel-Throwing 101 (Mon, July 20, 2026)

Clothes Mending Night (Tue, July 21, 2026)

Fine Silver Clay Jewelry: Articulture Class @TCM (Tue, July 21, 2026)

Instructor

Notes

Open Circuits (Tue, July 21, 2026)

Open Circuits

Your Weekly Electronics Hang at Twin Cities Maker

What to expect

Community Projects

Side Projects

Learn new skills

Troubleshoot Tuesday (Tue, July 21, 2026)

Wood Shop Maintenance Night (Wed, July 22, 2026)

WOOD SHOP MAINTENANCE NIGHT

Ceramics | Wheel-Throwing: Beyond the Basics (Wed, July 22, 2026)

Festool Domino Joiner - Basic Training (Wed, July 22, 2026)

FESTOOL DOMINO TRAINING

Twin Cities Maker Open House (Wed, July 22, 2026)

Fiber Fun Night (Wed, July 22, 2026)

New Member Orientation (Thu, July 23, 2026)

About this event

Wood Shop Orientation (Thu, July 23, 2026)

Rescheduled Metal Shop Maintenance Morning (Sat, July 11, 2026)